Typical parts
Brushless motor mounts (M2/M3 patterns) · Gimbal / camera damping brackets · Arm-to-frame connectors · Battery tray slide rails & latches
Zoryra Precision
Ngwa drone
Ndị a bụ drone akụkụ: moto mounts, ogwe aka njikọ, gimbal brackets, na batrị trays. The mbụ ihe onwunwe bụ 6061 aluminum, ma ọ bụ 7075 mgbe ịbịaru jụrụ. Tolerances na mating ihu na-eso Eserese. Standard ụzọ oge bụ banyere 8–10 ụbọchị maka 1–50 iberibe.
- Weight targets
- Thin-wall notes
- Anodize color + masking
- 1–50 pc batches
UAV buyers iterate fast on motor mounts, gimbal brackets, arm connectors, and battery rails. Share mass targets and mating faces early — we flag thin-wall and anodize risks in DFM before chips fly.
Material path: Al6061-T6 for most structures; 7075 when strength per gram matters (motor mounts, landing gear). Finish: clear / black anodize common; mask threads and arm mating faces unless drawn.
Process: 3-axis pocketing for most brackets; 5-axis when compound arm angles or undercuts reduce setups. Standard tier ≈ 10 days reference (production + air sketch) with anodize on the clock.
See anonymized cases below — arm connector, motor mount, gimbal bracket, battery tray — then upload STEP for an itemized reference quote.
Why choose Zoryra · Ngwa drone
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
Weight targets · Thin-wall notes · Anodize color + masking · 1–50 pc batches
Typical parts
- Brushless motor mounts (M2/M3 patterns)
- Gimbal / camera damping brackets
- Arm-to-frame connectors
- Battery tray slide rails & latches
- Landing gear blocks & prop guards
- FPV / payload adapter plates
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
- Mark anodize color + keep-out mating faces
- Thin walls ≥1.2 mm after pocketing unless DFM approved
- 1–50 pc pilot batches — share reorder rhythm
- 7075 vs 6061: call out early (cost & lead differ)
Typical UAV parts (anonymized)
Ihe · nkwụsi ike dị mkpa · ogo CNC ziri ezi. Mepee kaadị maka ikpe ma ọ bụ bulite STEP iji nweta ọnụahịa. Ihe oyiyi bụ akụkụ atụ, ọ bụghị foto ụlọ ọrụ nke ndị ọzọ.
Related
Related
FAQ
6061 ma ọ bụ 7075 maka mounts moto?
6061 maka ọtụtụ mounts quadcopter; 7075 mgbe ike kwa gram ma ọ bụ ịpịgharị akụkụ dị mkpa — dee ya na RFQ maka ndu & ego ziri ezi.
Ị nwere ike ị anodize na-enweghị mkpuchi ihu njikọ?
Ee — kọwaa ihu na-ezere na PDF; anyị na-ekpuchi ntuziaka na interface aka tupu anodize dị ka ụkpụrụ ma ọ bụrụ na eserese na-ekwu ihe dị iche.
Oge nduzi nkịtị maka 12–20 pcs UAV brackets?
Standard ≈ ụbọchị 8–10 ntụaka na anodize doro anya/mara agba (mmepụta + eserese ikuku). Express mgbe blanks dị njikere na ịcha dị ọkụ.
Ị na-akwado oghere agbakwunyere akpụkpọ aka?
Ee — bulite STEP; anyị na-ebipụta 3-axis vs 5-axis na DFM mgbe nchọta ma ọ bụ oghere agbakwunyere nke ga-achọ ọtụtụ nhazi.
Upload CAD for an itemized reference
AI Instant Reference Quote + engineering review within 12 business hours.
Other industries
Robotics & automationCustom CNC for cobot cells from Dongguan, China: typical parts, datums, inserts, anodize masking, Standard ~10 days reference — not just an industry tag.MedicalNon-implant instrument structures from Dongguan, China: housings, lab fixtures, surgical-instrument metal parts — QA docs optional, honest scope, no invented certs.AutomotivePilot hardware with clear lead tiers and coating notes built into the production clock.Electronics & semiconductorMetal around electronics and semiconductor equipment — heat spreaders, EMI, optics housings — not a wafer fab or cleanroom contractor.Ngwa akụkụ igwe nke AI na-eme ka o jụọ oyiNdị a bụ akụkụ akụrụngwa AI jụrụ oyi: efere oyi, ọtụtụ, na brackets. Ihe bụ aluminum ma ọ bụrụ na ịbịaru na-akpọ maka ọla kọpa. Flatness bụ ihe ọ bụla esereese na-akpọ si. Standard ụzọ oge na imecha bụ banyere 8–10 ụbọchị.Laser equipment partsNke a bụ akụkụ ngwa igwe ọkụ: mounts, oche nozzle, mounts optic, na base plates. Ihe eji eme ya bụ 6061 aluminom na ígwè anaghị agba nchara. Ntị, gụnyere ịdị larịị nke oche optic, na-agbaso eserese. Oge ọkọlọtọ bụ ihe dị ka ụbọchị 8–10. Nke a abụghị igwe ọkụ mechara.