STEP / STL / IGES — preview before sign-in.
Zoryra Precision
Wire EDM
Wire EDM when milling does not finish a sharp internal corner, a narrow slot, or hardened steel. It can be quoted.
- Ọkpụkpụ ime dị ịrịba ama
- Ọkpọkpụ sara mbara
- Ọla ike siri ike
- Enweghị nha eriri ma ọ bụ tank
Three steps to start
Material, qty, finish, lead tier, inspection.
Escalate complex jobs; Dongguan, China produce & ship.
What it is
A wire cuts a profile by electrical discharge. This page explains that path. It does not state a wire diameter, a tank size, or a machine count.
When to use it
Hardened tool steel, punch profiles, and internal corners a cutter cannot reach. Mating faces may still need a later mill or grind if the drawing requires it.
Quote path
Upload the STEP and mark the wire-EDM profiles. Milling and turning remain the usual path when the geometry can be machined.
Capability specs & DFM
| Item | Spec |
|---|---|
| Ụzọ ọnụahịa | Bulite eserese ahụ ma kpọọ usoro a |
| Jiri | Eriri na-egbu profaịlụ site na mgbapụta ọkụ eletrik. Peeji a kọwara ụzọ ahụ. Ọ naghị akọwa obosara eriri, nha tank, ma ọ bụ ọnụ ọgụgụ igwe. |
| Ekwughị | Ọ dịghị ịkọ igwe ma ọ bụ nha tank |
Shop floor & parts
FAQ
Do you quote wire EDM?
Yes. Write wire EDM on the profiles that need it. It is not treated as outside the quote.
Wire EDM or milling?
Milling is the usual path for aluminum and most steel. Wire EDM is the path when the corner, the slot, or the hardness needs it.
Other capabilities
Nchịkọta CNCMill / turn / drill hubCNC ịcha3/4/5-axis ịchaCNC ịgbanweShafts & akụkụ eji gbanweeỤdọ CNCMpịakọta, ịpị, datums5-axis igweỤdị akụkụ mgbagwoju anya, ntọala pere mpeNlele ọkpụrụkpụ metalBee · tụgharịa · ntinye ọkụỊkpụ site na laserỊkpụ akwụkwọ isiKpọtụrụ plasmaObere igwe dị arọ · enwere ike ịkọ
Upload CAD for an itemized reference
AI Instant Quote + engineer backup in business hours. No 3D printing / injection / die casting.