Typical parts
Brushless motor mounts (M2/M3 patterns) · Gimbal / camera damping brackets · Arm-to-frame connectors · Battery tray slide rails & latches
Zoryra Precision
Partijiet tad-drone
Dawn huma partijiet tad-droni: muntaturi tal-mutur, konnessjonijiet tad-dirgħajn, saljaturi gimbali, u trejs tal-batteriji. Il-materjal tas-soltu huwa 6061 aluminju, jew 7075 meta d-disinn jitlob. It-tolleranzi u l-uċuħ tat-tgħammir isegwu t-tpinġija. Il-ħin standard ta' tħejjija huwa ta' madwar 8–10 ijiem għal 1–50 biċċa.
- Weight targets
- Thin-wall notes
- Anodize color + masking
- 1–50 pc batches
UAV buyers iterate fast on motor mounts, gimbal brackets, arm connectors, and battery rails. Share mass targets and mating faces early — we flag thin-wall and anodize risks in DFM before chips fly.
Material path: Al6061-T6 for most structures; 7075 when strength per gram matters (motor mounts, landing gear). Finish: clear / black anodize common; mask threads and arm mating faces unless drawn.
Process: 3-axis pocketing for most brackets; 5-axis when compound arm angles or undercuts reduce setups. Standard tier ≈ 10 days reference (production + air sketch) with anodize on the clock.
See anonymized cases below — arm connector, motor mount, gimbal bracket, battery tray — then upload STEP for an itemized reference quote.
Why choose Zoryra · Partijiet tad-drone
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
Weight targets · Thin-wall notes · Anodize color + masking · 1–50 pc batches
Typical parts
- Brushless motor mounts (M2/M3 patterns)
- Gimbal / camera damping brackets
- Arm-to-frame connectors
- Battery tray slide rails & latches
- Landing gear blocks & prop guards
- FPV / payload adapter plates
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
- Mark anodize color + keep-out mating faces
- Thin walls ≥1.2 mm after pocketing unless DFM approved
- 1–50 pc pilot batches — share reorder rhythm
- 7075 vs 6061: call out early (cost & lead differ)
Typical UAV parts (anonymized)
Materjal · tolleranza kritika · ħames ta' CNC onest. Iftaħ karta għal każ jew ittella STEP biex tikseb kwotazzjoni. Immaġini huma parti minn illustrazzjonijiet, mhux ritratti ta' fabbriki ta' partijiet terzi.
Related
Related
FAQ
6061 jew 7075 għall-mounts tal-mutur?
6061 għall-biċċa l-kbira tal-mounts tal-quadcopters; 7075 meta l-qawwa kull gram jew it-tkeċċija tat-tresa tkun kritika — note it fuq l-RFQ biex ikollok lead u spejjeż preċiżi.
Tista’ tagħmel anodize mingħajr ma tkopri l-wiċċijiet li jiltaqgħu?
Iva — immarka l-wiċċijiet li ma għandhomx jitħawwdu fuq il-PDF; aħna nimblokkaw threads u interface tal-arms qabel anodize b'mod default sakemm id-drawings jgħidu mod ieħor.
Ħin tipiku tal-lead għal 12–20 biċċa UAV brackets?
Standard ≈ 8–10 ijiem referenza ma’ anodize ċar/swed (produzzjoni + sketsa bl-ajru). Express meta l-blanks ikunu lesti u l-finish ikun ħafif.
Inti tappoġġa angoli tal-idejn kumposti?
Iva — ibgħat STEP; aħna naqsmu bejn 3-assi u 5-assi f'DFM meta undercuts jew angoli kumposti jeħtieġu setup multipli.
Upload CAD for an itemized reference
AI Instant Reference Quote + engineering review within 12 business hours.
Other industries
Robotics & automationCustom CNC for cobot cells from Dongguan, China: typical parts, datums, inserts, anodize masking, Standard ~10 days reference — not just an industry tag.MedicalNon-implant instrument structures from Dongguan, China: housings, lab fixtures, surgical-instrument metal parts — QA docs optional, honest scope, no invented certs.AutomotivePilot hardware with clear lead tiers and coating notes built into the production clock.Electronics & semiconductorMetal around electronics and semiconductor equipment — heat spreaders, EMI, optics housings — not a wafer fab or cleanroom contractor.Partijiet tal-apparat ta’ tnaddaf AIDawn huma partijiet tat-tagħmir tat-tkessiħ AI: pjanċi kesħin, manifolds, u brackets. Il-materjal huwa aluminju sakemm id-disinn ma jitlobx ram. Il-pjanċa hija kwalunkwe ħaġa li jsejjaħ id-disinn. Il-ħin standard ta' tħejjija b' finitura huwa ta' madwar 8–10 ijiem.Laser equipment partsDawn huma parts ta’ tagħmir bil-laser: mounts, sodod tan-nozzle, mounts ottċiċi, u plates bażi. Materjali komuni huma aluminju 6061 u ħadid qatt. It-tolleranzi, inkluż l-għoli tas-sodda tal-ottika, jsegwu d-disinn. Ħin standard ta’ tqegħid huwa madwar 8–10 ijiem. Dan mhuwiex laser lest.