Typical parts
Brushless motor mounts (M2/M3 patterns) · Gimbal / camera damping brackets · Arm-to-frame connectors · Battery tray slide rails & latches
Zoryra Precision
ड्रोन टुकड़ा
ड्रोन टुकड़ा: मोटर, बाँह, घूर्णन, बैटरी। 6061 एल्युमिनियम। 8–10 दिन। अछि फाइल HTTPS सँ जाइत अछि। NDA अछि। ई पृष्ठ CNC दाम लेल अछि। सामग्री लिखू, जेना 6061 एल्युमिनियम वा स्टेनलेस, नक्शा पर सहनशीलता आ संख्या। सामान्य समय 8–10 दिन अछि, एक टुकड़ा सँ, Dongguan, China मे।
- Weight targets
- Thin-wall notes
- Anodize color + masking
- 1–50 pc batches
UAV buyers iterate fast on motor mounts, gimbal brackets, arm connectors, and battery rails. Share mass targets and mating faces early — we flag thin-wall and anodize risks in DFM before chips fly.
Material path: Al6061-T6 for most structures; 7075 when strength per gram matters (motor mounts, landing gear). Finish: clear / black anodize common; mask threads and arm mating faces unless drawn.
Process: 3-axis pocketing for most brackets; 5-axis when compound arm angles or undercuts reduce setups. Standard tier ≈ 10 days reference (production + air sketch) with anodize on the clock.
See anonymized cases below — arm connector, motor mount, gimbal bracket, battery tray — then upload STEP for an itemized reference quote.
Why choose Zoryra · ड्रोन टुकड़ा
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
Weight targets · Thin-wall notes · Anodize color + masking · 1–50 pc batches
Typical parts
- Brushless motor mounts (M2/M3 patterns)
- Gimbal / camera damping brackets
- Arm-to-frame connectors
- Battery tray slide rails & latches
- Landing gear blocks & prop guards
- FPV / payload adapter plates
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
- Mark anodize color + keep-out mating faces
- Thin walls ≥1.2 mm after pocketing unless DFM approved
- 1–50 pc pilot batches — share reorder rhythm
- 7075 vs 6061: call out early (cost & lead differ)
Typical UAV parts (anonymized)
ई पृष्ठ CNC दाम लेल अछि। सामग्री लिखू, जेना 6061 एल्युमिनियम वा स्टेनलेस, नक्शा पर सहनशीलता आ संख्या। सामान्य समय 8–10 दिन अछि, एक टुकड़ा सँ, Dongguan, China मे।
Related
Related
FAQ
6061 or 7075 for motor mounts?
6061 for most quadcopter mounts; 7075 when strength per gram or thread pull-out is critical — note it on the RFQ for accurate lead & cost.
Can you anodize without coating mating faces?
Yes — mark keep-out faces on the PDF; we mask threads and arm interfaces before anodize by default unless the drawing says otherwise.
Typical lead time for 12–20 pc UAV brackets?
Standard ≈ 8–10 days reference with clear/black anodize (production + air sketch). Express when blanks are ready and finish is light.
Do you support compound arm angles?
Yes — upload STEP; we quote 3-axis vs 5-axis in DFM when undercuts or compound angles would otherwise need multiple setups.
Upload CAD for an itemized reference
AI Instant Reference Quote + engineering review within 12 business hours.
Other industries
Robotics & automationCustom CNC for cobot cells from Dongguan, China: typical parts, datums, inserts, anodize masking, Standard ~10 days reference — not just an industry tag.MedicalNon-implant instrument structures from Dongguan, China: housings, lab fixtures, surgical-instrument metal parts — QA docs optional, honest scope, no invented certs.AutomotivePilot hardware with clear lead tiers and coating notes built into the production clock.Electronics & semiconductorMetal around electronics and semiconductor equipment — heat spreaders, EMI, optics housings — not a wafer fab or cleanroom contractor.AI ठंढा टुकड़ा टुकड़ा अछिठंढा टुकड़ा: पट, नली, आधार। एल्युमिनियम, नक्शा तामा कहथि तँ तामा। अछि फाइल HTTPS सँ जाइत अछि। NDA अछि। ई पृष्ठ CNC दाम लेल अछि। सामग्री लिखू, जेना 6061 एल्युमिनियम वा स्टेनलेस, नक्शा पर सहनशीलता आ संख्या। सामान्य समय 8–10 दिन अछि, एक टुकड़ा सँ, Dongguan, China मे।Laser equipment partsलेजर टुकड़ा: आधार, नोजल, लेंस। 6061 एल्युमिनियम वा स्टेनलेस। पूरा लेजर नहि अछि। फाइल HTTPS सँ जाइत अछि। NDA अछि। ई पृष्ठ CNC दाम लेल अछि। सामग्री लिखू, जेना 6061 एल्युमिनियम वा स्टेनलेस, नक्शा पर सहनशीलता आ संख्या। सामान्य समय 8–10 दिन अछि, एक टुकड़ा सँ, Dongguan, China मे।