대표 부품
Payload and instrument brackets · Satellite bus interface plates · Ground-support and handling fixtures · Separation and fit-check plates
Zoryra Precision
Commercial Space CNC Parts | Zoryra Precision
We machine brackets, plates, and ground fixtures around commercial launch and satellite hardware. The drawing sets the fit. Flight-critical and ITAR work is not the default scope.
- NDA on request
- Optional FAI / CMM
- Aluminum and stainless first
- Material certs when asked
Commercial space buyers usually need a small batch of aluminum or stainless interfaces: payload mounts, separation-test plates, antenna check fixtures, and ground-support brackets. Upload STEP and PDF, pick material and inspection, and the quote lists the machining features.
We do not claim flight heritage, launch records, or a wall of aerospace certificates. If a job needs a special alloy, a material cert, or a first-article report, say so on the RFQ and we confirm it before cutting.
Zoryra를 고르는 이유 · Commercial Space CNC Parts | Zoryra Precision
공차 안내 (도면 우선)
Mating faces often ±0.02–0.05 mm. Tighter datums follow the drawing. Optional CMM or FAI can be added on the quote.
주의점
NDA on request · Optional FAI / CMM · Aluminum and stainless first · Material certs when asked
대표 부품
- Payload and instrument brackets
- Satellite bus interface plates
- Ground-support and handling fixtures
- Separation and fit-check plates
- Antenna and sensor check mounts
- Pocketed lightening brackets
공차 안내 (도면 우선)
Mating faces often ±0.02–0.05 mm. Tighter datums follow the drawing. Optional CMM or FAI can be added on the quote.
주의점
- Say early if the part is only for ground test
- Call out inspectable dimensions and insert types
- Do not treat this page as a flight-approval claim
관련 공정 / 사례
자주 묻는 질문
Do you machine flight hardware for commercial launch?
Default work is ground tooling, interface plates, and non-flight brackets. Flight-critical parts are not accepted as a standard job. Ask engineering before sending that kind of drawing.
Which files should we upload?
STEP plus a PDF with tolerances, material, and finish. Mark the faces that must be inspected.
다른 산업
로봇과 자동화중국 동관 공장에서 로봇·자동화. STEP / STL / IGES 업로드로 항목별 참고 견적 — 1개부터.의료중국 동관 공장에서 의료·실험 장비. STEP / STL / IGES 업로드로 항목별 참고 견적 — 1개부터.Automotive중국 동관 공장에서 자동차·EV. STEP / STL / IGES 업로드로 항목별 참고 견적 — 1개부터.UAV / drones중국 동관 공장에서 드론 구조 부품. STEP / STL / IGES 업로드로 항목별 참고 견적 — 1개부터.전자와 반도체중국 동관 공장에서 전자 하드웨어. STEP / STL / IGES 업로드로 항목별 참고 견적 — 1개부터.AI hardware중국 동관 공장에서 AI 하드웨어 / 콜드플레이트. STEP / STL / IGES 업로드로 항목별 참고 견적 — 1개부터.