Typical parts
Brushless motor mounts (M2/M3 patterns) · Gimbal / camera damping brackets · Arm-to-frame connectors · Battery tray slide rails & latches
Zoryra Precision
Pezas de drones
Estas son pezas de drons: soportes de motor, enlaces de brazos, soportes de cardán e bandexas de batería. O material habitual é o aluminio 6061, ou 7075 cando o debuxo o pide. As tolerancias e as caras de apareamento seguen o debuxo. O prazo de entrega estándar é duns 8-10 días para 1-50 pezas.
- Weight targets
- Thin-wall notes
- Anodize color + masking
- 1–50 pc batches
UAV buyers iterate fast on motor mounts, gimbal brackets, arm connectors, and battery rails. Share mass targets and mating faces early — we flag thin-wall and anodize risks in DFM before chips fly.
Material path: Al6061-T6 for most structures; 7075 when strength per gram matters (motor mounts, landing gear). Finish: clear / black anodize common; mask threads and arm mating faces unless drawn.
Process: 3-axis pocketing for most brackets; 5-axis when compound arm angles or undercuts reduce setups. Standard tier ≈ 10 days reference (production + air sketch) with anodize on the clock.
See anonymized cases below — arm connector, motor mount, gimbal bracket, battery tray — then upload STEP for an itemized reference quote.
Why choose Zoryra · Pezas de drones
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
Weight targets · Thin-wall notes · Anodize color + masking · 1–50 pc batches
Typical parts
- Brushless motor mounts (M2/M3 patterns)
- Gimbal / camera damping brackets
- Arm-to-frame connectors
- Battery tray slide rails & latches
- Landing gear blocks & prop guards
- FPV / payload adapter plates
Tolerance guidance
Structural mounting ±0.05 mm typical; bearing / shaft bores per drawing (H7 common); flat damping faces 0.05–0.1 mm when called out. Drawing governs.
Watch-outs
- Mark anodize color + keep-out mating faces
- Thin walls ≥1.2 mm after pocketing unless DFM approved
- 1–50 pc pilot batches — share reorder rhythm
- 7075 vs 6061: call out early (cost & lead differ)
Typical UAV parts (anonymized)
Material · tol crítico. · Alcance CNC honesto. Abre unha tarxeta para un caso ou carga STEP para cotizar. As imaxes son ilustracións parciales, non tomas de fábrica de terceiros.
Related
Related
FAQ
6061 ou 7075 para soportes de motor?
6061 para a maioría dos montaxes de quadcopter; 7075 cando a forza por gramo ou a extracción do fío é fundamental; anótao na solicitude de solicitude para obter un custo e un chumbo precisos.
Pódese anodizar sen revestir as caras de apareamento?
Si: marca as caras que non hai no PDF; enmascaramos fíos e armamos interfaces antes de anodizar por defecto a non ser que o debuxo diga o contrario.
Prazo de entrega típico para soportes de UAV de 12 a 20 unidades?
Referencia estándar ≈ 8–10 días con anodizado transparente/negro (produción + boceto de aire). Expresa cando os espazos en branco están listos e o acabado é lixeiro.
Soportas ángulos compostos dos brazos?
Si, carga STEP; citamos 3 eixes fronte a 5 eixes en DFM cando os recortes ou ángulos compostos necesitarían varias configuracións.
Upload CAD for an itemized reference
AI Instant Reference Quote + engineering review within 12 business hours.
Other industries
Robotics & automationCustom CNC for cobot cells from Dongguan, China: typical parts, datums, inserts, anodize masking, Standard ~10 days reference — not just an industry tag.MedicalNon-implant instrument structures from Dongguan, China: housings, lab fixtures, surgical-instrument metal parts — QA docs optional, honest scope, no invented certs.AutomotivePilot hardware with clear lead tiers and coating notes built into the production clock.Electronics & semiconductorMetal around electronics and semiconductor equipment — heat spreaders, EMI, optics housings — not a wafer fab or cleanroom contractor.Partes de equipos de refrixeración AIEstas son pezas de equipos de refrixeración de IA: placas frías, colectores e soportes. O material é aluminio a non ser que o debuxo reclame cobre. A planitude é o que o debuxo chama. O prazo de entrega estándar con acabado é duns 8-10 días.Laser equipment partsEstes son as pezas do equipamento láser: soportes, asentos de boquillas, soportes ópticos e placas base. Os materiais comúns son o aluminio 6061 e o inoxidable. As tolerancias, incluída a planitude do asento óptico, seguen o debuxo. O prazo de entrega estándar é duns 8-10 días. Este non é un láser acabado.