Aluminiyɔmu 6061
AKA: Al6061-T6 / EN-AW6061 ye a ka baara ye
Jogo jɔnjɔnw
BaarakɛsoA bɛ se ka soldaMusow ka musaka ka dɔgɔ
Baarakɛso jɔcogo Al (Mg-Si); common default grade ye quotes kɔnɔ.
Zoryra Precision
CNC ka fɛnw & finiw Dongguan, Sinuwa jamana na | Zoryra Precision ye
Zoryra Precision ka fɛnw ni finiw Dongguan, Sinuwa jamana na: 6061/7075, 304/316, POM; anodize, blast, passive, mugu bɛ se ka kɛ. Finish donw sigilen bɛ lead clock kan. ISO dabɔlen si tɛ yen.
Fɛn minnu bɛ kɛ ka fɛnw dilan
I ka jatedenw sugandi minnu bɛ bɛn i ka poroze ma
O jatew bɛ se ka sugandi Zoryra Precision AI Instant Quote kɔnɔ. Filɛri ka kɛɲɛ ni denbaya + taabolo ye. Ka kalasi dɔ tunun (misali la, baarakɛminɛn kɛrɛnkɛrɛnnen nɛgɛ)? I ka bataki ci [email protected] walima ka kuma ni ɛntɛrinɛti ɲɛmɔgɔ dɔ ye.
Fɛn minnu bɛ kɛ ka ban (anodize / blast / passivate / powder) bɛ atlas kɔnɔ min bɛ duguma — finiw bɛ bɛn fɛn ma (anodize tɛ kɛ inox kan).
Filɛri ka kɛɲɛ ni denbaya ye25 jatedenw jirali
Aluminiyɔmu (Aluminiyɔmu).6
Aluminiyɔmu 6082
AKA: Al6082 / EN-AW6082 ye baara kɛ ni a ye
Jogo jɔnjɔnw
Fanga cɛmancɛ laSumaya jiginniA bɛ se ka solda
Fanga cɛmancɛ ni weldability/thermal conductivity ɲuman ye structures kama.
Aluminiyɔmu 5052
AKA: Al5052 / bɔgɔdaga-minɛn kanulen
Jogo jɔnjɔnw
A bɛ se ka sɔgɔsɔgɔBend-friendly (kɔlɔsili-ɲɔgɔnna).Sow (Sow) minnu bɛ yen
A bɛ se ka sɔgɔsɔgɔ; min ka ca ni sɛbɛnw kurulen sow ye ani CNC yeelenma.
Aluminiyɔmu 5083
AKA: Al5083 / kɔgɔjida la, a bɛ se ka sɔgɔsɔgɔ
Jogo jɔnjɔnw
A bɛ se ka sɔgɔsɔgɔ kosɛbɛFanga hakɛ dantɛmɛnenStock ka plati
Fanga hakɛ danmadɔ, sɔgɔsɔgɔninjɛ kunbɛncogo ka bon platiw/jɔyɔrɔw la.
Aluminiyɔmu 7075
AKA: Al7075-T6 / EN-AW7075, a bɛ fɔ cogo min na
Jogo jɔnjɔnw
Fanga ka bonSɛgɛn tɛ min naMasinaw ka ɲi
Al fanga ka bon ka ɲɛsin jɔli / sɛgɛn yɔrɔw ma; masinw ka ɲɛ; tuma caman na, a bɛ kɛ anodi ye.
Aluminiyɔmu 2024
AKA: Al2024 / aerospace-klasi fanga
Jogo jɔnjɔnw
Fanga ka bonSɛgɛn baarakɛcogoWeldability danma
Fanga ka bon aerospace-klasi Al; welding limited — ka dimi dafa ja kan.
Inox tɛ min na4
Inox 304 ye
AKA: SS304 / 1,4301 ye
Jogo jɔnjɔnw
Général inoxPassif (Pasiva) ye OK yeAnodize (anodize) tɛ yen
Inox min bɛ kɛ fɛn bɛɛ lajɛlen na; passive/polish — a tɛ anodize ye.
Inox 316 ye
AKA: SS316 / a ka fisa ka sɔgɔsɔgɔninjɛ kunbɛn
Jogo jɔnjɔnw
A ka fisa ka sɔgɔsɔgɔninjɛ kunbɛnDɔgɔtɔrɔso/laboratuwari min bɛ kɛ tuma bɛɛPassif (Pasiva) ye OK ye
Nɔgɔli kunbɛncogo ka fisa ni 304 ye; a ka ca furakɛli/laboratuwari minɛnw na.
Inox 303 ye
AKA: SS303 / hɔrɔnya-masin
Jogo jɔnjɔnw
Masina hɔrɔnyalenAw bɛ yɔrɔ misɛnninw hakɛ fɔTurn/mill teriya don
Free-machining stainless for turned/milled volume yɔrɔ misɛnninw.
17-4PH min tɛ sɔgɔ
AKA: 17-4PH / 1,4542, Bamako, Mali
Jogo jɔnjɔnw
Sanjiko gɛlɛyaliFanga ka bonAw ye dimi wele
Sanji-gɛlɛya-sɔgɔsɔgɔninjɛ; weleli kɛ funteni-furakɛli cogoya kan jaw kan.
Nɛgɛ4
Nɛgɛ nɔgɔlen
AKA: A36 / Q235 kalanso
Jogo jɔnjɔnw
Sɔrɔko siratigɛ laMugu / ɔkisizɛni nɛrɛmaA ka nɔgɔn ka masin kɛ
Sɔrɔko siratigɛ la nɛgɛso jɔcogo; mugu / ɔkisizɛni nɛrɛma / zinki min ka ca.
1045 karɔbɔli nɛgɛ
AKA: 1045 / C45, Bamako, Mali
Jogo jɔnjɔnw
Kabɔn cɛmancɛShafts (Sɔgɔsɔgɔninjɛw).A bɛ se ka furakɛ ni funteni ye
Nɛgɛ min bɛ kɛ ni karɔbɔli cɛmancɛ ye; barika ka bon ka tɛmɛ nɛgɛ nɔgɔlen kan — a ka ca a la jirisunw na.
4140 nɛgɛ min bɛ kɛ ni nɛgɛ ye
AKA: 4140 / 42CrMo kalasi
Jogo jɔnjɔnw
Fanga ka bonGɛlɛya / nɔ bilaliAw bɛ funteni furakɛli dafa
Alloy structurel nɛgɛ; funteni furakɛli dafa ni ɛntɛrinɛti ye.
Baarakɛminɛn nɛgɛ (général) .
AKA: jɛrɛn baarakɛminɛn-nɛgɛ kalan
Jogo jɔnjɔnw
A bɛ se ka don a laBaarakɛminɛnw kalanniKalanso hakɛ fɔ sɛbɛnniw kɔnɔ
Wear/tooling class — ka grade tigitigi jira sɛbɛnw kɔnɔ (SKD / S136 wdfl via engineer).
Titanium (Titanium) ye1
Ti-6Al-4V titaniyɔmu
AKA: TC4 / Kalanso 5nan
Jogo jɔnjɔnw
Fanga-kɛnɛba-ka-se-gɛlɛyaA ka nɔgɔnMasina baara min bɛ kɛ dɔɔni dɔɔni
Fanga-ka-segin-ka-bɔ; slower machining — ɛntɛrinɛti injiniyɛri ka seginnkanni yɔrɔ gɛlɛnw kan.
Kupu sɔgɔlenw3
Nɛgɛso
AKA: Nɛgɛ / kuran sɔgɔlen hɔrɔnyalen
Jogo jɔnjɔnw
Hɔrɔnya-tigɛA bɛ kɛ sababu ye ka mɔgɔw ɲɛminɛFitiniw / ɲɛgɛnw
Hɔrɔnya-tigɛ-cogo; conductivity ɲuman — fittings ani cosmetic yɔrɔw.
Nɛgɛso
AKA: Nɛgɛso
Jogo jɔnjɔnw
A bɛ se ka don a laBushings (Busiw) yeAw ye kalasi tigitigi kɔlɔsi
A ka ca a la bushings wear — aw bɛ a grade tigitigi kɔlɔsi ni a mago bɛ a la.
Kupu C110 ye
AKA: C110 / ETP nɛgɛso
Jogo jɔnjɔnw
Conductivity ka bonTɛmɛnenKuran / funteni-minɛnw
Conductivity ka bon funteni/kuran yɔrɔw la.
Ɛntɛrinɛti plastikiw7
ABS
AKA: ABS injiniyɛri plastiki
Jogo jɔnjɔnw
Sow bɛɛ lajɛlenMasina dilanni nɔgɔnFiɲɛw (fixtures) minnu bɛ kɛ
Sow/fixtures jɛrɛnw; a ka nɔgɔn ka masin kɛ.
Nilon (PA) .
AKA: PA / Nilon ye
Jogo jɔnjɔnw
A ka gɛlɛnGears / sliderw (slide) minnu bɛ kɛJi funu
A ka gɛlɛn gears/sliders ma — aw bɛ ji funu lajɛ fitininw kan.
POM / Asetali ye
AKA: POM / Delrin-kalanso
Jogo jɔnjɔnw
A hakɛ bɛ sabatiA bɛ se ka don a laPlastiki tigitigiw
A hakɛ bɛ sabati ani a tɛ sɛgɛn ka ɲɛsin plastiki yɔrɔw ma minnu bɛ kɛ ka ɲɛ.
Polikarbonati (PC) .
AKA: PC: Bamako
Jogo jɔnjɔnw
Sugandili jɛlenwImpact toughness (Kɔnɔnafili gɛlɛya).Stress-crack ladonni
So jɛlen/translucent bɛ se ka kɛ — kɔlɔsili degun ka kari.
Akriliki / PMMA
AKA: PMMA / akiriliki
Jogo jɔnjɔnw
Optique / jiracogoA bɛ se ka polisiAw ye brittleness kɔlɔsi
Yɔrɔw ɲɛnama/jiracogo; dakunw bɛ se ka polisi.
PTFE / Teflon
AKA: PTFE ye
Jogo jɔnjɔnw
A bɛ kɛ ni kemikali yeFriction ka dɔgɔnA ka gɛlɛn ka dɔgɔn
Chemique inert, low friction — low stiffness mago bɛ dilancogo ladonni na.
PEEK
AKA: PEEK plastiki min bɛ baara kɛ kosɛbɛ
Jogo jɔnjɔnw
Temp. ka bonFanga ka bonPremium musaka
Plastiki min ka funteni ka bon/a fanga ka bon; premium — ka ɲɛsin wajibi ɲinini ma.
Atlas laban
Taabolo · fɛnw · ɲɛmɔgɔya-waati nɔfɛkow
Sannikɛlaw bɛ finiw ta ni ɲɛ ye. Donw ye reference adders ye — quote b’u tila. Polisi, burusi, kuromati, zinki plati, ɔkisidi nɛrɛma, kuran, nikɛri plati, tumble ani penti kelen-kelen bɛɛ bɛ ni ɲɛ ye wa u bɛ se ka sugandi quotation kan.
- Fɛn minnu bɛ kɛ ka baara kɛAl / nɛgɛ / inox / plastiki
- Plɔmu bɛ nɔ bilaA ka c’a la, tile +0 (kosmɛtiki teliyalenba) .
- Kɔlɔsili kɛBaarakɛminɛnw taamasiyɛnw bɛ ye; a ka ɲi kɔnɔnafɛnw & furuɲɔgɔnma ɲɛda la.
- Fɛn minnu bɛ kɛ ka baara kɛA fanba ye Al / inox ye
- Plɔmu bɛ nɔ bila~+1–2 tile (a bɛ tali kɛ layidu la) .
- Kɔlɔsili kɛHali matte; a bɛ sɔrɔ ka kɔn anodize ɲɛ.
- Fɛn minnu bɛ kɛ ka baara kɛAluminiyɔmu dɔrɔn de bɛ yen
- Plɔmu bɛ nɔ bila~+Tile 2–4; anodize gɛlɛn ka jan
- Kɔlɔsili kɛAw bɛ wele bila masike ma ɲɛgɛnw kan; a tɛ kɛ inox ye.
- Fɛn minnu bɛ kɛ ka baara kɛSS304 / SS316 ye baara kɛ
- Plɔmu bɛ nɔ bila~+1–3 tile
- Kɔlɔsili kɛA bɛ sɔgɔsɔgɔninjɛ kunbɛncogo ɲɛ; tuma caman na ni polisi ye.
- Fɛn minnu bɛ kɛ ka baara kɛNɛgɛ / Al jɔcogo
- Plɔmu bɛ nɔ bila~+3–5 tile
- Kɔlɔsili kɛFilimu belebeleba; masike jiriw & fits.
- Fɛn minnu bɛ kɛ ka baara kɛInox / aluminiyɔmu
- Plɔmu bɛ nɔ bila~+1–3 tile (kosmɛtiki hakɛ) .
- Kɔlɔsili kɛAw bɛ sample walima Ra target ci ka ɲɛsin ɲɛgɛnw ma.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| Nɛgɛw | 6061 / 7075 Al, 304 / 316 SS, nɛgɛw, nɛgɛ |
| Plastikiw | POM, Nylon, PC, PTFE (a sɔrɔli tɛ kelen ye) |
| A bɛ ban | I n’a fɔ masin, anodize, biɲɛ blast, pasivate, mugu coat |
| Certs (sɛbɛnw) bɛ sɔrɔ | Material certs bɛ sɔrɔ ka kɛɲɛ ni komandi bɛnkan ye |
| DFM ka laadilikan | Match finish to function — cosmetic anodize mago bɛ masking notes la |
Jɔn b’a kɛ masin na, ani yɔrɔ min
Yɔrɔw bɛ izini siratigɛ la ka bɔ Dongguan Zerui Precision Manufacturing Co., Ltd. la Dongguan, Sinuwa, Guangdong. Kɛnɛma marka: ZORYRA / Zoryra Precision.
Ka bɔ 1 pc. CAD upload kɔfɛ i bɛ AI itemized reference sɔrɔ; yamaruya jɔnjɔnw bɛ tugu ja ni bɛnkan sarali node kɔ. An tɛ tɛmɛn mɔgɔ sabananw ka jiriw fotow kan k’u kɛ an ka layini ye.
Nin ɲɛ in tɛ ISO / AS / FDA nimɔrɔ dabɔlenw jira. An tɛ sistɛmu minnu minɛ, olu ma sɛbɛn i n’a fɔ u bɛ minɛ cogo min na. Izini lajɛw bɛ se ka labɛn.
Zoryra Precision ka fɛnw ni finiw Dongguan, Sinuwa jamana na: 6061/7075, 304/316, POM; anodize, blast, passive, mugu bɛ se ka kɛ. Finish donw sigilen bɛ lead clock kan. ISO dabɔlen si tɛ yen.
Dongguan, Sinuwa jamana ka fɛnw ni finiw: 6061/7075, 304/316, POM quote-ready. Anodize, blast, passivate, mugu i n’a fɔ ticked — tile kan plɔmu waati. Inox tɛ anodi ye. Materiel certs ka komandi kelen-kelen bɛɛ.
Yɔrɔ minnu bɛ kɛ cogoya la
- Aluminiyɔmu min dilannen don ni anodi ye
- Yɔrɔ minnu bɛ ni biɲɛ ye
- Pasifié inox ye
- Brackets minnu bɛ kɛ ni mugu ye
- I n’a fɔ ɲɛda minnu dilannen don ni masin ye
- Fɛn minnu bɛ kɛ ni fini gɛlɛnw ye
Fɛn minnu bɛ kɛ & finiw
- 6061 ye — anodize (anodize) OK
- 7075 ye — fini gɛlɛn OK
- 304. Ɲɛjirali dɔw — passive, a tɛ anodize (anodize) kɛ
- POM ye — i n’a fɔ a bɛ kɛ cogo min na ni masin ye
DFM : masike, finimugu janya, ɲɛda minnu bɛ ɲɔgɔn sɔrɔ
- Match finish ka baara kɛ; cosmetic anodize mago bɛ masike sɛbɛnniw na
- Marka kɛ jiriw ni dugukolow kan
- Aw kana anodize inox kɛ
- Finish donw sigilen bɛ lead clock kan
Sɛgɛsɛgɛli ni sɛbɛnw (i n’a fɔ u bɛ taamasiyɛn kɛ cogo min na) .
- Rapport dimensionnel i n’a fɔ a bɛ taamasiyɛn kɛ cogo min na
- FAI i n’a fɔ a bɛ taamasiyɛn kɛ cogo min na
- CMM i n’a fɔ a bɛ taamasiyɛn kɛ cogo min na
- Materiel certs ka kɛɲɛ ni komandi bɛnkan ye
Lead time (waati bɛ daminɛ sarali yɔrɔ la) .
Kunnafoni ɲɛmɔgɔyaso : Sɔrɔko / Standard / Express. Standard ye baarakɛdon 10 ɲɔgɔn ye i n’a fɔ kunnafoni; Aw bɛ 6 ɲɔgɔn fɔ ni seko bɛ se ka kɛ.
Waati bɛ daminɛ wari sarayɔrɔ la min bɛnna bɛnkansɛbɛn kɔnɔ. Anodize, powder, passivate ani outsourced heat-treat donw sigilen bɛ o waati kan.
Titanium, fini gɛlɛn gɛlɛn, fɛn minnu bɛ don a kɔnɔ, ani jateminɛkɛlan gɛlɛnw bɛ segin ka waati kɛ. Quote sketch bɛ a ɲɛminɛ.
An t’a kɛ min ye
- Inox tɛ anodi ye
- ISO dabɔlen si tɛ yen
- Aw bɛ tilew ban waati ɲɛmɔgɔya la
- Kɛrɛnkɛrɛnnenya/Pantone match mago bɛ injiniyɛri bɛnkan na
FAQ
Yala aw bɛ ISO / AS / FDA nimɔrɔw fɔ yan wa?
Jateden minnu dabɔra, olu si tɛ yen. An tɛ sistɛmu minnu minɛ, olu ma sɛbɛn i n’a fɔ u bɛ minɛ cogo min na. Izini lajɛw bɛ se ka labɛn.
Yala aw bɛ 1 pc ta wa?
Awɔ. CAD kɔfɛ i bɛ AI itemized reference sɔrɔ; yamaruya jɔnjɔnw bɛ tugu ja ni sarali node kɔ.
Plomb wagati bɛ daminɛ tuma jumɛn?
Bɛnkansɛbɛn sarali yɔrɔ la. Anodize, mugu, passivate donw sigilen bɛ waati kan. Tiers kan quote: Sɔrɔko / Standard / Express.
Yala inox bɛ se ka anodize wa?
Ayi, aw bɛ passif kɛ walima ka polisi kɛ o nɔ na.
Yala finidon donw bɛ jate plɔmu kan wa?
Awɔ. Anodize, mugu, passive sigi waati kan.
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.