Zoryra Precision

Aluminiyɔmu Anodizing min bɛ Dongguan, Sinuwa jamana na | Zoryra Precision ye

Zoryra Precision aluminiyɔmu anodize min bɛ Dongguan, Sinuwa jamana na: 6061/7075 jɛlen, nɛrɛma, walima fini gɛlɛn. Maskɛ jiriw ni dugukolow ja kan. Inox tɛ anodi ye. Finish donw sigilen bɛ lead clock kan. ISO dabɔlen si tɛ yen.

AI Quote with anodize Talk to an Engineer

Options

Clear anodize, black anodize, and hard anodize are selectable finishes for aluminum families in the quote tool.

DFM tips

Mark cosmetic faces and masking zones on the drawing. Threads and grounding points often need mask notes.

Not for stainless

Anodize is typical for aluminum. Stainless usually uses passivation or polish — see Passivation page.

Capability specs & DFM

Item	Spec
Basi nɛgɛ	Aluminiyɔmu (6061 / 7075 typique) .
Suguw	Anodize jɛlen / nɛrɛma / gɛlɛn
DFM ka laadilikan	Mask threads & dugukolo yɔrɔw ja kan

Jɔn b’a kɛ masin na, ani yɔrɔ min

Yɔrɔw bɛ izini siratigɛ la ka bɔ Dongguan Zerui Precision Manufacturing Co., Ltd. la Dongguan, Sinuwa, Guangdong. Kɛnɛma marka: ZORYRA / Zoryra Precision.

Ka bɔ 1 pc. CAD upload kɔfɛ i bɛ AI itemized reference sɔrɔ; yamaruya jɔnjɔnw bɛ tugu ja ni bɛnkan sarali node kɔ. An tɛ tɛmɛn mɔgɔ sabananw ka jiriw fotow kan k’u kɛ an ka layini ye.

Nin ɲɛ in tɛ ISO / AS / FDA nimɔrɔ dabɔlenw jira. An tɛ sistɛmu minnu minɛ, olu ma sɛbɛn i n’a fɔ u bɛ minɛ cogo min na. Izini lajɛw bɛ se ka labɛn.

Dongguan, Sinuwa aluminiyɔmu anodize: jɛlen, nɛrɛma, gɛlɛn coat i n’a fɔ ticked — for 6061 / 7075. Mask threads and grounds. Inox tɛ anodi ye. Tilew sigilen bɛ ɲɛmɔgɔya waati kan.

Yɔrɔ minnu bɛ kɛ cogoya la

So minnu bɛ anodize jɛlenw na
Kosmɛtiki yɔrɔw nɛrɛma
Fɛn minnu bɛ kɛ ni fini gɛlɛnw ye
Blast o kɔ anodize
As-machined furuɲɔgɔnmaw
Fila minnu bɛ masike

Fɛn minnu bɛ kɛ & finiw

6061 ye — anodize (anodize) OK
7075 ye — fini gɛlɛn OK
304. Ɲɛjirali dɔw — passive, a tɛ anodize (anodize) kɛ
Kulɛri kɛrɛnkɛrɛnnen — ɛntɛrinɛti bɛnkansɛbɛn

DFM : masike, finimugu janya, ɲɛda minnu bɛ ɲɔgɔn sɔrɔ

Aw bɛ ɲɛda ɲɛgɛnw kɛ ani ka masike yɔrɔw taamasiyɛn ja kan
Tuma caman na, jiriw ni dugukolow mago bɛ masike sɛbɛnniw na
A wele ko coat thickness vs fits
Aw kana anodize inox kɛ

Sɛgɛsɛgɛli ni sɛbɛnw (i n’a fɔ u bɛ taamasiyɛn kɛ cogo min na) .

Rapport dimensionnel i n’a fɔ a bɛ taamasiyɛn kɛ cogo min na
FAI i n’a fɔ a bɛ taamasiyɛn kɛ cogo min na
CMM i n’a fɔ a bɛ taamasiyɛn kɛ cogo min na
Materiel certs ka kɛɲɛ ni komandi bɛnkan ye

Lead time (waati bɛ daminɛ sarali yɔrɔ la) .

Kunnafoni ɲɛmɔgɔyaso : Sɔrɔko / Standard / Express. Standard ye baarakɛdon 10 ɲɔgɔn ye i n’a fɔ kunnafoni; Aw bɛ 6 ɲɔgɔn fɔ ni seko bɛ se ka kɛ.

Waati bɛ daminɛ wari sarayɔrɔ la min bɛnna bɛnkansɛbɛn kɔnɔ. Anodize, powder, passivate ani outsourced heat-treat donw sigilen bɛ o waati kan.

Titanium, fini gɛlɛn gɛlɛn, fɛn minnu bɛ don a kɔnɔ, ani jateminɛkɛlan gɛlɛnw bɛ segin ka waati kɛ. Quote sketch bɛ a ɲɛminɛ.

An t’a kɛ min ye

Inox tɛ anodi ye
ISO dabɔlen si tɛ yen
Aw bɛ tilew ban waati ɲɛmɔgɔya la
Kɛrɛnkɛrɛnnenya/Pantone match mago bɛ injiniyɛri bɛnkan na

FAQ

Yala aw bɛ ISO / AS / FDA nimɔrɔw fɔ yan wa?

Jateden minnu dabɔra, olu si tɛ yen. An tɛ sistɛmu minnu minɛ, olu ma sɛbɛn i n’a fɔ u bɛ minɛ cogo min na. Izini lajɛw bɛ se ka labɛn.

Yala aw bɛ 1 pc ta wa?

Awɔ. CAD kɔfɛ i bɛ AI itemized reference sɔrɔ; yamaruya jɔnjɔnw bɛ tugu ja ni sarali node kɔ.

Plomb wagati bɛ daminɛ tuma jumɛn?

Bɛnkansɛbɛn sarali yɔrɔ la. Anodize, mugu, passivate donw sigilen bɛ waati kan. Tiers kan quote: Sɔrɔko / Standard / Express.

Yala inox bɛ se ka anodize wa?

Ayi, aw bɛ passif kɛ walima ka polisi kɛ o nɔ na.

Yala finidon donw bɛ jate plɔmu kan wa?

Awɔ. Anodize, mugu, passive sigi waati kan.

Can I hard-anodize 7075?

Often yes — confirm cosmetic class and thickness in engineering review.

Next: upload CAD or talk to an Engineer

AI Instant Reference Quote + engineering review within 12 business hours.

Get a Quote FAQ