Aluminium a wɔde yɛ 6061
AKA: Al6061-T6 / EN-AW6061 a wɔde kyerɛw nsɛm
Su atitiriw
Adwumayɛfo pɔnkɔWotumi de weld yɛƐho ka sua
Adwumayɛ pɔnkɔ nhyehyɛe Al (Mg-Si); default default grade a wɔtaa de di dwuma wɔ nsɛm a wɔafa aka mu.
Zoryra Precision
CNC Nneɛma & Nneɛma a Wɔde Awie wɔ Dongguan, China | Zoryra Pɛpɛɛpɛ
Zoryra Nneɛma a wɔde yɛ nneɛma pɛpɛɛpɛ ne nea wɔde wie wɔ Dongguan, China: 6061/7075, 304/316, POM; anodize, blast, pasivate, powder a wopɛ. Finish nna tena dɔn a edi kan no so. ISO a wɔayɛ no foforo biara nni hɔ.
Nneɛma a wɔde yɛ nneɛma
Paw abasobɔde ahorow a ɛfata wo dwumadi no
Saa abasobɔde ahorow yi yɛ nea wobetumi apaw wɔ Zoryra Precision AI Instant Quote mu. Filter denam abusua + nhyehyɛe so. Woyera grade bi (e.g. adwinnade soronko dade)? Email [email protected] anaa wo ne mfiridwumayɛfo bi nkasa.
Finishes (anodize / blast / passivate / powder) wɔ atlas a ɛwɔ aseɛ ha no mu — match finish to material (no anodize wɔ stainless so).
Filter sɛnea abusua te25 abasobɔdeɛ a ɛkyerɛ
Aluminium a wɔde yɛ nneɛma6
Aluminium a wɔde yɛ 6082
AKA: Al6082 / EN-AW6082 na ɛyɛ adwuma wɔ hɔ
Su atitiriw
Ahoɔden a ɛwɔ mfinimfiniƆhyew a ɛkɔ nipadua no muWotumi de weld yɛ
Medium ahoɔden a weldability pa / ɔhyew conductivity ma structures.
Aluminium a wɔde yɛ 5052
AKA: Al5052 / krataa-dade a wɔpɛ
Su atitiriw
Ɛyɛ nea ɛko tia nsɛeBend-adamfofa kwan soAdan a Wɔde Sisi Adan
Nea ɛko tia nsɛe; abu so ma krataa bend adan ne hann CNC.
Aluminium a wɔde yɛ 5083
AKA: Al5083 / po mu-grade nsɛe a ɛko tia
Su atitiriw
Nneɛma a ɛko tia nsɛe a ɛkorɔnAhoɔden a ɛfataMprɛte a wɔde ahyɛ mu
Ahoɔden a ɛkɔ fam, ahoɔden a ɛkorɔn a ɛko tia nsɛe ma mprɛte/nhyehyɛe ahorow.
Aluminium a wɔde yɛ 7075
AKA: Al7075-T6 / EN-AW7075 a wɔde kyerɛw nsɛm
Su atitiriw
Ahoɔden a ɛkorɔnƆbrɛ a ɛko tiaMfiri ahorow yiye
High-ahoɔden Al ma structure / ɔbrɛ afã horow; mfiri ahorow yiye; mpɛn pii no wɔde anodized yɛ.
Aluminium a wɔde yɛ 2024
AKA: Al2024 / ahunmu-adesuakuw ahoɔden
Su atitiriw
Ahoɔden a ɛkorɔnƆbrɛ adwumayɛWeldability a anohyeto wom
Ahoɔden kɛse a ɛwɔ ahunmu-class Al; welding limited — si abufuw so dua wɔ mfoniniyɛ so.
Stainless a ɛnyɛ den4
Nneɛma a ɛnyɛ den 304
AKA: SS304 / 1.4301 na ɛwɔ hɔ
Su atitiriw
General stainlessPassivate a ɛyɛ OKAnodize biara nni hɔ
Stainless a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so; pasivate/polish — ɛnyɛ anodize.
Nneɛma a ɛnyɛ den 316
AKA: SS316 / eye sen biara a ɛko tia nsɛe
Su atitiriw
Ɛyɛ papa a ɛko tia nsɛeAduruyɛ/lab abu soPassivate a ɛyɛ OK
Nneɛma a ɛko tia nsɛe a eye sen 304; abu so wɔ aduruyɛ/lab hardware mu.
Nneɛma a ɛnyɛ den 303
AKA: SS303 / mfiri a wɔde yɛ adwuma a wontua hwee
Su atitiriw
Mfiri a wɔde yɛ adwuma a wontua hweeFa nne kɛse ma afã nketenketeDan/mill adamfofa su
Free-machining stainless ma adan / miled volume afã nketewa.
17-4PH a ɛnyɛ den
AKA: 17-4PH / 1.4542. Nsɛm a wɔka kyerɛ
Su atitiriw
Osutɔ a ɛyɛ denAhoɔden a ɛkorɔnFrɛ abufuw
Stainless a ɛma osu tɔ yɛ den; frɛ ɔhyew-treat tebea wɔ mfonini ahorow so.
Dade a wɔde yɛ nneɛma4
Dade a ɛyɛ mmerɛw
AKA: A36 / Q235 adesuakuw
Su atitiriw
Sikasɛm mu nsɛmPowder / oxide tuntum a wɔde yɛ aduruƐnyɛ den sɛ wɔde mfiri bɛyɛ
Sikasɛm mu adansi dade; powder / tuntum oxide / zinc abu so.
1045 carbon dade a wɔde yɛ adwuma
AKA: 1045 / C45 na ɛwɔ hɔ
Su atitiriw
Carbon a ɛwɔ ntamShafts a wɔde yɛ nneɛmaWotumi de ɔhyew yɛ adwuma
Dade a ɛwɔ carbon a ɛwɔ mfinimfini; ahoɔden sen dade a ɛyɛ mmerɛw — abu so ma shafts.
4140 a wɔde afrafra dade
AKA: 4140 / 42CrMo adesuakuw
Su atitiriw
Ahoɔden a ɛkorɔnTough / nkɛntɛnsoSi ɔhyew aduru no so dua
Alloy nhyehyɛe dade; si ɔhyew a wɔde sa yare so dua denam mfiridwuma so.
Adwinnade dade (a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so) .
AKA: general adwinnade-dade adesuakuw
Su atitiriw
Nhyɛso a ɛko tiaNnwinnade adesuakuwKyerɛw abasobɔde wɔ nsɛm a wɔakyerɛw mu
Wear/tooling class — kyerɛ grade pɔtee wɔ nsɛm a wɔakyerɛw mu (SKD / S136 ne nea ɛkeka ho via engineer).
Titanium a wɔde yɛ nneɛma1
Ti-6Al-4V titanium a wɔde yɛ nneɛma
AKA: TC4 / Adesuakuw a ɛto so 5
Su atitiriw
Ahoɔden a ɛkorɔn-kɔ-mu duruNea emu yɛ hareMfiri a wɔde yɛ adwuma brɛoo
Ahoɔden a ɛkorɔn-kɔ-mu duru; slower machining — mfiridwumayɛfo nhwehwɛmu ma afã horow a ɛyɛ den.
Kɔbere a wɔde afrafra3
Kɔbere a wɔde yɛ
AKA: Kɔbere / kɔbere a wɔde twa kwa a ɛnyɛ hwee
Su atitiriw
Free-cutting a wɔde wɔn ho to soNea ɛma nneɛma kɔ yiyeFittings / nneɛma a wɔde yɛ ahosiesie
Nneɛma a wɔde twa nneɛma a wɔde wɔn ho; conductivity pa — fittings ne cosmetic afã horow.
Kɔbere a wɔde yɛ adwuma
AKA: Kɔbere
Su atitiriw
Nhyɛso a ɛko tiaBushings a ɛwɔ hɔHyɛ abasobɔde pɔtee nsow
Common for wear bushings — hyɛ no nsow pɛpɛɛpɛ grade bere a ɛho hia.
Kɔbere C110
AKA: C110 / ETP kɔbere
Su atitiriw
Nsuo a ɛkɔ nsuo mu a ɛkorɔnƆhyew a ɛyɛ hyewElectrical / ɔhyew afiri
Conductivity a ɛkorɔn ma ɔhyew / anyinam ahoɔden afã horow.
Engineering plastics a wɔde yɛ nneɛma7
ABS
AKA: ABS mfiridwuma ho plastic
Su atitiriw
Adan a ɛwɔ hɔ nyinaaMfiri a wɔde yɛ adwuma a ɛnyɛ denNneɛma a wɔde si hɔ
Adan/nneɛma a wɔde si hɔ nyinaa; ɛnyɛ den sɛ wɔde mfiri bɛyɛ.
Nylon (PA) .
AKA: PA / Nylon a wɔde yɛ adwuma
Su atitiriw
Ɛyɛ denGears / nneɛma a wɔde twetwe nneɛmaNsuo a ɛho ayɛ kurukuruwa
Tough ma gears/sliders — hwɛ nsuo a ɛho ahonhon wɔ fits so.
POM / Acetal a wɔde yɛ nneɛma
AKA: POM / Delrin-adesuakuw
Su atitiriw
Nsusuwii a ɛyɛ denNhyɛso a ɛko tiaPlastik a wɔde yɛ nneɛma pɛpɛɛpɛ
Dimensionally stable na wear-resistant ma pɛpɛɛpɛ plastic afã horow.
Polycarbonate (PC) a wɔde yɛ nneɛma .
AKA: PC
Su atitiriw
Nneɛma a wubetumi apaw no mu da hɔNkɛntɛnso a ɛyɛ denAdwennwen-mpaapaemu hwɛ
Clear / translucent adan a ebetumi aba — hwɛ adwennwen mpaapaemu.
Acrylic / PMMA a wɔde yɛ nneɛma
AKA: PMMA / akrilik a wɔde yɛ nneɛma
Su atitiriw
Optical / ɔyɛkyerɛWotumi yɛ no PolishHwɛ sɛnea ɛyɛ mmerɛw
Optical/display afã horow; wobetumi ayɛ anoano no fɛfɛɛfɛ.
PTFE / Teflon
AKA: PTFE na ɛyɛ adwuma
Su atitiriw
Nnuru a ɛnyɛ adwumaFriction a ɛba famNneɛma a ɛyɛ den a ɛba fam
Chemically inert, friction a ɛba fam — stiffness a ɛba fam hia design hwɛ.
PEEK
AKA: PEEK plastic a ɛyɛ adwuma yiye
Su atitiriw
Temp. a ɛkorɔnAhoɔden a ɛkorɔnPremium ka a wɔbɔ
Plastik a ɛyɛ hyew/ahoɔden kɛse; premium — ma asɛdeɛ a wɔhwehwɛ.
Wie atlas no
Adeyɛ · nneɛma · lead-time nkɛntɛnso
Adetɔfo paw nneɛma a wɔawie wɔ aniwa so. Nna yɛ reference adders — quote no mu paapae wɔn mu. Polish, brushed, chromate, zinc plate, black oxide, electropolish, nickel plate, tumble, ne paint biara wɔ kratafa na wobetumi apaw wɔ quote no so.
- Nneɛma a Wɔde Yɛ AdwumaAl / dade / a ɛnyɛ den / plastic
- Kɔbere nkɛntɛnsoMpɛn pii no +0 nna (aduru a wɔde yɛ ahosiesie a ɛyɛ ntɛm sen biara) .
- Hyɛ no nsowAdwinnade agyiraehyɛde ahorow a wotumi hu; eye ma internals & mating anim.
- Nneɛma a Wɔde Yɛ AdwumaDodow no ara yɛ Al / stainless
- Kɔbere nkɛntɛnso~+1–2 nna (ɛgyina ntonto so) .
- Hyɛ no nsowMatte mpo; abu so ansa na wɔayɛ anodize.
- Nneɛma a Wɔde Yɛ AdwumaAluminium nkutoo na ɛwɔ hɔ
- Kɔbere nkɛntɛnso~+2–4 nnafua; anodize a ɛyɛ den no kyɛ
- Hyɛ no nsowFrɛ masking wɔ cosmetics so; ɛnyɛ nea wɔde yɛ stainless.
- Nneɛma a Wɔde Yɛ AdwumaSS304 / SS316 na ɛwɔ hɔ
- Kɔbere nkɛntɛnso~+1–3 nnafua
- Hyɛ no nsowƐma sɛnea ɛko tia nsɛe no tu mpɔn; mpɛn pii no wɔde polish na ɛyɛ.
- Nneɛma a Wɔde Yɛ AdwumaSteel / Al nhyehyɛe ahorow
- Kɔbere nkɛntɛnso~+3–5 nnafua
- Hyɛ no nsowSini a ɛyɛ den; mask nhama & fits.
- Nneɛma a Wɔde Yɛ AdwumaNneɛma a ɛnyɛ den / aluminium
- Kɔbere nkɛntɛnso~+1–3 nna (cosmetic grade) .
- Hyɛ no nsowSend sample anaa Ra target ma cosmetics.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| Nneɛma a wɔde yɛ dade | 6061 / 7075 Al, 304 / 316 SS, dade, kɔbere |
| Plastik a wɔde yɛ nneɛma | POM, Nylon, PC, PTFE (ɛsono sɛnea ɛwɔ hɔ) |
| Nneɛma a wɔde wie | Sɛnea wɔde mfiri ayɛ, anodize, bead blast, pasivate, powder atade |
| Certs a wɔde ma | Material certs a ɛwɔ hɔ wɔ order apam biara mu |
| DFM afotu | Match wie to function — cosmetic anodize hia masking nkyerɛwde |
Hena na ɔyɛ no mfiri, ne ɛhe
Afã horow no yɛ adwumayɛbea tẽẽ fi Dongguan Zerui Precision Manufacturing Co., Ltd. wɔ Dongguan, China, Guangdong. Abɔnten so ahyɛnsode: ZORYRA / Zoryra Precision.
Efi 1 pc. CAD upload akyi no wunya AI itemized reference; ahyɛde ahorow a ɛyɛ den di mfonini no ne sikatua node a wɔapene so no akyi. Yɛmfa afifide mfonini ahorow a ɛto so abiɛsa mma sɛ yɛn line.
Kratafa yi nkyerɛ ISO / AS / FDA nɔma biara a wɔayɛ. Wɔankyerɛw nhyehyɛe ahorow a yenni mu sɛnea wokura mu no. Wobetumi ayɛ adwumayɛbea nsrahwɛ ho nhyehyɛe.
Zoryra Nneɛma a wɔde yɛ nneɛma pɛpɛɛpɛ ne nea wɔde wie wɔ Dongguan, China: 6061/7075, 304/316, POM; anodize, blast, pasivate, powder a wopɛ. Finish nna tena dɔn a edi kan no so. ISO a wɔayɛ no foforo biara nni hɔ.
Dongguan, China nneɛma ne nea wɔde wie: 6061/7075, 304/316, POM quote-ready. Anodize, blast, pasivate, powder sɛnea ticked — nna wɔ kɔbere dɔn no so. Stainless nyɛ anodized. Nneɛma certs wɔ order biara mu.
Afã horow a wɔtaa yɛ
- Aluminium a wɔde anodized ayɛ
- Afã horow a wɔde nhwiren abɔ mu
- Passivated a ɛnyɛ den
- Brackets a wɔde powder adura ho
- Sɛnea wɔde mfiri ayɛ anim
- Nneɛma a wɔde atade a ɛyɛ den ayɛ
Nneɛma & nneɛma a wɔde wie
- 6061 na ɛwɔ hɔ — anodize OK
- 7075 na ɛwɔ hɔ — atade a ɛyɛ den OK
- 304 na ɛwɔ hɔ — pasivate, ɛnyɛ anodize
- POM — sɛnea wɔde mfiri ayɛ
DFM: masking, atade no mu duru, aware anim
- Match finish to function; cosmetic anodize hia mask nkyerɛwde
- Hyɛ nhama ne nnyinaso agyirae
- Mfa anodize nnyɛ stainless
- Finish nna tena dɔn a edi kan no so
Nhwehwɛmu ne nkrataa (sɛnea wɔahyɛ no agyirae) .
- Dimensional amanneɛbɔ sɛnea wɔahyɛ no agyirae
- FAI sɛnea wɔahyɛ no agyirae
- CMM sɛnea wɔahyɛ no agyirae
- Material certs per order apam biara
Lead time (dɔn no fi ase wɔ payment node no so) .
Akannifoɔ tiers: Sikasɛm / Gyinapɛn / Express. Standard yɛ bɛyɛ adwuma nnafua 10 sɛ nea wɔde gyina so; Kyerɛ bɛyɛ 6 bere a tumi ma kwan no.
Dɔn no fi ase wɔ baabi a wɔapene so sɛ wobetua sika no. Anodize, powder, pasivate, ne outsourced heat-treat nna te saa dɔn no so.
Titanium, atade a ɛyɛ den a ɛyɛ den, nneɛma a wɔde hyɛ mu, ne nneɛma a wɔde susuw nneɛma a ɛyɛ den san yɛ dɔn. Nsɛm a wɔafa aka sketch no na edi so.
Nea yɛnyɛ
- Stainless nyɛ anodized
- ISO a wɔayɛ no foforo biara nni hɔ
- Wie nna wɔ dɔn a edi kan no so
- Special/Pantone match hia engineering apam
FAQ
So wokyerɛw ISO / AS / FDA nɔma ahorow wɔ ha?
Nnɔmbae biara nni hɔ a wɔayɛ. Wɔankyerɛw nhyehyɛe ahorow a yenni mu sɛnea wokura mu no. Wobetumi ayɛ adwumayɛbea nsrahwɛ ho nhyehyɛe.
So wofa 1 pc?
Aane. CAD akyi no wunya AI itemized reference; firm orders di drawing ne payment node no akyi.
Bere bɛn na dɔn a edi kan no fi ase?
Wɔ sikatua node a wɔapene so no. Anodize, powder, pasivate nna tra dɔn no so. Tiers wɔ quote no so: Sikasɛm / Gyinapɛn / Express.
So wobetumi de anodized ayɛ stainless?
Dabi, pasivate anaa polish mmom.
So nna a wɔde wie no bu kɔbere so?
Aane. Anodize, powder, pasivate tena dɔn no so.
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.