Zoryra Precision
Select grades and finishes in the quote form — engineering review for special alloys. Match finish to material (e.g. anodize for aluminum).
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China.
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China.
AKA: Al6061-T6 / EN-AW6061
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China.
AKA: Al6082 / EN-AW6082
Medium strength with good weldability/thermal conductivity for structures.
AKA: Al5052 / sheet-metal favorite
Corrosion-resistant; common for sheet bend housings and light CNC.
AKA: Al5083 / marine-grade corrosion resistance
Moderate strength, high corrosion resistance for plates/structures.
AKA: Al7075-T6 / EN-AW7075
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China.
AKA: Al2024 / aerospace-class strength
High-strength aerospace-class Al; welding limited — confirm temper on drawing.
AKA: SS304 / 1.4301
tshipida-tshipida tsimbi; fhedza/fhedza — a fhedza.
AKA: SS316 / better corrosion resistance
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China.
AKA: SS303 / free-machining
Free-machining stainless for turned/milled volume small parts.
AKA: 17-4PH / 1.4542
Precipitation-hardening stainless; call out heat-treat condition on drawings.
AKA: A36 / Q235 class
Economical structural steel; powder / black oxide / zinc common.
AKA: 1045 / C45
Medium-carbon steel; stronger than mild steel — common for shafts.
AKA: 4140 / 42CrMo class
Alloy structural steel; confirm heat treatment with engineering.
AKA: general tool-steel class
Wear/tooling class — specify exact grade in notes (SKD / S136 etc. via engineer).
AKA: TC4 / Grade 5
High strength-to-weight; slower machining — engineer review for complex parts.
AKA: Brass / free-cutting copper alloy
Free-cutting; good conductivity — fittings and cosmetic parts.
AKA: Bronze
Common for wear bushings — note exact grade when required.
AKA: C110 / ETP copper
High conductivity for thermal/electrical parts.
AKA: ABS engineering plastic
General housings/fixtures; easy to machine.
AKA: PA / Nylon
Tough for gears/sliders — watch moisture swell on fits.
AKA: POM / Delrin-class
Dimensionally stable and wear-resistant for precision plastic parts.
AKA: PC
Clear/translucent housings possible — watch stress cracking.
AKA: PMMA / acrylic
Optical/display parts; edges can be polished.
AKA: PTFE
Chemically inert, low friction — low stiffness needs design care.
AKA: PEEK high-performance plastic
High-temp/high-strength plastic; premium — for demanding duty.
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China. Mutengo wa AI ndi tsumbavhudzwa fhedzi. Renga tshithihi ni sa athu u fhira.
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
| Item | Spec |
|---|---|
| tshipida | Zwipida zwa tshifhefhonya: mutshini, tshanḓa, tshijiki, bateri. Aluminiamu 6061. Maḓuvha 8–10. Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China. |
| tshipida | POM, Nylon, tshipida, PTFE (tshipida tshipida) |
| fhedza | mushumo, fhedza, tshipida, fhedza, tshipida |
| tshipida | tshithu tshipida tshipida tshipida oda tshipida |
| DFM tshipida | Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China. |
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
AI Instant Reference Quote + engineering review within 12 business hours.
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China.
Sia heḷi ndi ḽa mutengo wa CNC. Ṅwalani tshithu, sa aluminiamu 6061 kana tsimbi, ṅwalani tshivhalo kha tshifanyiso na tshivhalo. Tshifhinga tsha misi ndi maḓuvha 8–10, u bva kha tshithihi, Dongguan, China.
