Aluminum 6061
AKA: Al6061-T6 / EN-AW6061
Key traits
WorkhorseWeldableCost-effective
Workhorse structural Al (Mg-Si); common default grade in quotes.
Zoryra Precision
CNC materiali in zaključki v Dongguanu na Kitajskem | Zoryra Precision
Zoryra Precision materiali in zaključki v Dongguanu, Kitajska: 6061/7075, 304/316, POM; eloksiranje, peskanje, pasiviranje, prah neobvezno. Zaključite dneve, sedite na svinčeni uri. Brez izumljenega ISO.
Manufacturing materials
Pick grades that fit your project
These grades are selectable in Zoryra Precision AI Instant Quote. Filter by family + process. Missing a grade (e.g. specialty tool steel)? Email [email protected] or talk to an engineer.
Finishes (anodize / blast / passivate / powder) are in the atlas below — match finish to material (no anodize on stainless).
Filter by familyShowing 25 grades
Aluminum6
Aluminum 6082
AKA: Al6082 / EN-AW6082
Key traits
Medium strengthThermal conductivityWeldable
Medium strength with good weldability/thermal conductivity for structures.
Aluminum 5052
AKA: Al5052 / sheet-metal favorite
Key traits
Corrosion resistantBend-friendlyHousings
Corrosion-resistant; common for sheet bend housings and light CNC.
Aluminum 5083
AKA: Al5083 / marine-grade corrosion resistance
Key traits
High corrosion resistanceModerate strengthPlate stock
Moderate strength, high corrosion resistance for plates/structures.
Aluminum 7075
AKA: Al7075-T6 / EN-AW7075
Key traits
High strengthFatigue resistantMachines well
High-strength Al for structural / fatigue parts; machines well; often anodized.
Aluminum 2024
AKA: Al2024 / aerospace-class strength
Key traits
High strengthFatigue performanceLimited weldability
High-strength aerospace-class Al; welding limited — confirm temper on drawing.
Stainless4
Stainless 304
AKA: SS304 / 1.4301
Key traits
General stainlessPassivate OKNo anodize
General-purpose stainless; passivate/polish — not anodize.
Stainless 316
AKA: SS316 / better corrosion resistance
Key traits
Better corrosion resistanceMedical/lab commonPassivate OK
Better corrosion resistance than 304; common in medical/lab hardware.
Stainless 303
AKA: SS303 / free-machining
Key traits
Free-machiningVolume small partsTurn/mill friendly
Free-machining stainless for turned/milled volume small parts.
17-4PH stainless
AKA: 17-4PH / 1.4542
Key traits
Precipitation hardeningHigh strengthCall out temper
Precipitation-hardening stainless; call out heat-treat condition on drawings.
Steel4
Mild steel
AKA: A36 / Q235 class
Key traits
EconomicalPowder / black oxideEasy to machine
Economical structural steel; powder / black oxide / zinc common.
1045 carbon steel
AKA: 1045 / C45
Key traits
Medium carbonShaftsHeat-treatable
Medium-carbon steel; stronger than mild steel — common for shafts.
4140 alloy steel
AKA: 4140 / 42CrMo class
Key traits
High strengthTough / impactConfirm heat treat
Alloy structural steel; confirm heat treatment with engineering.
Tool steel (general)
AKA: general tool-steel class
Key traits
Wear resistantTooling classSpecify grade in notes
Wear/tooling class — specify exact grade in notes (SKD / S136 etc. via engineer).
Titanium1
Ti-6Al-4V titanium
AKA: TC4 / Grade 5
Key traits
High strength-to-weightLightweightSlower machining
High strength-to-weight; slower machining — engineer review for complex parts.
Copper alloys3
Brass
AKA: Brass / free-cutting copper alloy
Key traits
Free-cuttingConductiveFittings / cosmetics
Free-cutting; good conductivity — fittings and cosmetic parts.
Bronze
AKA: Bronze
Key traits
Wear resistantBushingsNote exact grade
Common for wear bushings — note exact grade when required.
Copper C110
AKA: C110 / ETP copper
Key traits
High conductivityThermalElectrical / heat sinks
High conductivity for thermal/electrical parts.
Engineering plastics7
ABS
AKA: ABS engineering plastic
Key traits
General housingsEasy machiningFixtures
General housings/fixtures; easy to machine.
Nylon (PA)
AKA: PA / Nylon
Key traits
ToughGears / slidersMoisture swell
Tough for gears/sliders — watch moisture swell on fits.
POM / Acetal
AKA: POM / Delrin-class
Key traits
Dimensionally stableWear resistantPrecision plastics
Dimensionally stable and wear-resistant for precision plastic parts.
Polycarbonate (PC)
AKA: PC
Key traits
Clear optionsImpact toughnessStress-crack care
Clear/translucent housings possible — watch stress cracking.
Acrylic / PMMA
AKA: PMMA / acrylic
Key traits
Optical / displayPolishableWatch brittleness
Optical/display parts; edges can be polished.
PTFE / Teflon
AKA: PTFE
Key traits
Chemically inertLow frictionLow stiffness
Chemically inert, low friction — low stiffness needs design care.
PEEK
AKA: PEEK high-performance plastic
Key traits
High tempHigh strengthPremium cost
High-temp/high-strength plastic; premium — for demanding duty.
Dokončaj atlas
Proces · materiali · vpliv na čas izvedbe
Kupci vizualno izbirajo zaključke. Dnevi so referenčni seštevalniki - citat jih razdeli. Polir, brušeni, kromat, cinkova plošča, črni oksid, elektropoliranje, nikljeva plošča, sušilni stroj in barva imajo vsako stran in jih je mogoče izbrati v ponudbi.
- MaterialiAl / jeklo / nerjaveče / plastika
- Udar svincaObičajno +0 dni (najhitrejša kozmetika)
- OpombaVidne sledi orodja; dobro za notranje organe in obraze za parjenje.
- MaterialiVečinoma Al / nerjavno
- Udar svinca~+1–2 dni (odvisno od čakalne vrste)
- OpombaEnako mat; običajno pred eloksiranjem.
- MaterialiSamo aluminij
- Udar svinca~+2–4 dni; trdo eloksirati dlje
- OpombaOznačite maskiranje na kozmetiki; ni za nerjavno.
- MaterialiSS304 / SS316
- Udar svinca~+1–3 dni
- OpombaIzboljša odpornost proti koroziji; pogosto s poliranjem.
- MaterialiJeklene / Al konstrukcije
- Udar svinca~+3–5 dni
- OpombaDebel film; navoji in prilega maske.
- MaterialiNerjaveče/aluminij
- Udar svinca~+1–3 dni (kozmetični razred)
- OpombaPošljite vzorec ali Ra tarčo za kozmetiko.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| Kovine | 6061 / 7075 Al, 304 / 316 SS, jekla, medenina |
| Plastika | POM, najlon, PC, PTFE (razpoložljivost je različna) |
| Dokončanja | Kot obdelano, eloksirano, peskano, pasivirano, praškasti premaz |
| Potrdila | Potrdila o materialu so na voljo po pogodbi o naročilu |
| DFM nasvet | Ujemite končno obdelavo s funkcijo – kozmetično eloksiranje mora prikriti note |
Kdo ga obdeluje in kje
Deli so tovarniško neposredno iz Dongguan Zerui Precision Manufacturing Co., Ltd. v mestu Dongguan, Kitajska, Guangdong. Zunanja znamka: ZORYRA / Zoryra Precision.
Od 1 kos. Po nalaganju CAD dobite razčlenjeno referenco AI; trdna naročila sledijo žrebu in dogovorjenemu vozlišču plačila. Fotografij rastlin tretjih oseb ne posredujemo kot našo linijo.
Ta stran ne prikazuje izmišljenih številk ISO/AS/FDA. Sistemi, ki jih ne držimo, niso zapisani kot zadržani. Lahko se dogovorite za obisk tovarne.
Zoryra Precision materiali in zaključki v Dongguanu, Kitajska: 6061/7075, 304/316, POM; eloksiranje, peskanje, pasiviranje, prah neobvezno. Zaključite dneve, sedite na svinčeni uri. Brez izumljenega ISO.
Dongguan, Kitajska, materiali in zaključki: 6061/7075, 304/316, POM pripravljen za predračun. Anodizirati, peskati, pasivirati, prašiti kot je označeno - dnevi na svinčeni uri. Nerjavno jeklo ni anodizirano. Certifikati materiala po naročilu.
Tipični deli
- Anodiziran aluminij
- Deli, peskani s kroglicami
- Pasivirano nerjaveče
- Praškasto lakirani nosilci
- Obdelani obrazi
- Strukture s trdim premazom
Materiali in zaključki
- 6061 — anodizirati OK
- 7075 — trda dlaka OK
- 304 — pasivira, ne anodizira
- POM — kot strojno obdelan
DFM: maskiranje, debelina nanosa, spojne površine
- Ujemanje zaključka z delovanjem; kozmetična anodizacija potrebuje opombe o maski
- Označite niti in podlago
- Ne eloksirajte nerjavnega jekla
- Zaključni dnevi sedite na vodilni uri
Pregled in dokumenti (kot označeno)
- Dimenzionalno poročilo kot označeno
- FAI kot odkljukano
- CMM kot označeno
- Potrdila o materialu na pogodbo o naročilu
Dobavni rok (ura se začne na plačilnem vozlišču)
Lead tiers: Economy / Standard / Express. Standard je približno 10 delovnih dni kot referenca; Iztisnite približno 6, ko zmogljivost dopušča.
Ura se začne na dogovorjenem plačilnem vozlišču. Dnevi za eloksiranje, prašenje, pasiviranje in zunanje toplotne obdelave so na tej uri.
Titan, debela trda prevleka, vstavki in zapleteni merilniki za ponovno ura. Vodi skica citata.
Česa ne počnemo
- Nerjaveče jeklo ni anodizirano
- Brez izmišljenega ISO
- Zaključite dneve na glavni uri
- Za posebno/Pantone ujemanje je potreben inženirski dogovor
FAQ
Ali tukaj navajate številke ISO/AS/FDA?
Brez izmišljenih številk. Sistemi, ki jih ne držimo, niso zapisani kot zadržani. Lahko se dogovorite za obisk tovarne.
Ali vzamete 1 kom?
Da. Po CAD-u dobite razčlenjeno referenco AI; trdna naročila sledijo vozlišču črpanja in plačila.
Kdaj se začne glavna ura?
Na dogovorjenem plačilnem vozlišču. Anodizirajte, prašite, pasivirajte dneve na uro. Stopnje ponudbe: Economy / Standard / Express.
Ali je nerjavno jeklo mogoče anodizirati?
Št. Namesto tega ga pasivirajte ali zloščite.
Ali ciljni dnevi štejejo za prednost?
Da. Anodizirati, prašiti, pasivirati sedi na uri.
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.