fail ej itok HTTPS. Ewor NDA. Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

AI kiiō wōt jeḷā jāān
eṃ jinoinbōk kiiō wōt jeḷā jāānjeḷā jāānjeje ioon CAD
delōñjeje eta

Zoryra Precision

CNC Materials & Surface Finish Atlas

Select grades and finishes in the quote form — engineering review for special alloys. Match finish to material (e.g. anodize for aluminum).

Configure material in quoteTalk to an Engineer
men jerbal ilo AI kiiō wōt jeḷā jāān

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

peḷọk jeḷā jāān ṃaajin
kōṃṃan jerbal men ko

kōṃṃan ko jikin ko ne jimwe aṃ jerbal

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

men jerbal jān men jerbal
Showing 25 grades

aen ejjab ḷap6

aen ejjab ḷap 6061

aen ejjab ḷap 6061

CNC jek aenkōm̧oolemmakūt ḷap men jinoin

AKA: Al6061-T6 / EN-AW6061

men peḷọk men jerbal
WorkhorseWeldableCost-effective

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

kōļāekkatak ḷap ḷọk
Aluminum 6082

Aluminum 6082

CNC jek aenemmakūt ḷap men jinoin

AKA: Al6082 / EN-AW6082

men peḷọk men jerbal
Medium strengthThermal conductivityWeldable

Medium strength with good weldability/thermal conductivity for structures.

kōļāekkatak ḷap ḷọk
Aluminum 5052

Aluminum 5052

CNC jek aenkōm̧ool

AKA: Al5052 / sheet-metal favorite

men peḷọk men jerbal
Corrosion resistantBend-friendlyHousings

Corrosion-resistant; common for sheet bend housings and light CNC.

kōļāekkatak ḷap ḷọk
Aluminum 5083

Aluminum 5083

CNC jek aenkōm̧ool

AKA: Al5083 / marine-grade corrosion resistance

men peḷọk men jerbal
High corrosion resistanceModerate strengthPlate stock

Moderate strength, high corrosion resistance for plates/structures.

kōļāekkatak ḷap ḷọk
aen ejjab ḷap 7075

aen ejjab ḷap 7075

CNC jek aenemmakūt ḷap men jinoin

AKA: Al7075-T6 / EN-AW7075

men peḷọk men jerbal
High strengthFatigue resistantMachines well

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

kōļāekkatak ḷap ḷọk
Aluminum 2024

Aluminum 2024

CNC jek aenemmakūt ḷap men jinoin

AKA: Al2024 / aerospace-class strength

men peḷọk men jerbal
High strengthFatigue performanceLimited weldability

High-strength aerospace-class Al; welding limited — confirm temper on drawing.

kōļāekkatak ḷap ḷọk

aen ejjab rū4

aen ejjab rū 304

aen ejjab rū 304

CNC jek aenkōm̧oolemmakūt ḷap men jinoin

AKA: SS304 / 1.4301

men peḷọk men jerbal
General stainlessPassivate OKNo anodize

aolep-unin aen ejjab rū; kōṃṃan ioon kajoor/kōmājej — jab kōṃṃan ioon aen.

kōļāekkatak ḷap ḷọk
aen ejjab rū 316

aen ejjab rū 316

CNC jek aenkōm̧oolemmakūt ḷap men jinoin

AKA: SS316 / better corrosion resistance

men peḷọk men jerbal
Better corrosion resistanceMedical/lab commonPassivate OK

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

kōļāekkatak ḷap ḷọk
Stainless 303

Stainless 303

CNC jek aenemmakūt ḷap men jinoin

AKA: SS303 / free-machining

men peḷọk men jerbal
Free-machiningVolume small partsTurn/mill friendly

Free-machining stainless for turned/milled volume small parts.

kōļāekkatak ḷap ḷọk
17-4PH stainless

17-4PH stainless

CNC jek aenemmakūt ḷap men jinoin

AKA: 17-4PH / 1.4542

men peḷọk men jerbal
Precipitation hardeningHigh strengthCall out temper

Precipitation-hardening stainless; call out heat-treat condition on drawings.

kōļāekkatak ḷap ḷọk

aen kajoor4

Mild steel

Mild steel

CNC jek aenkōm̧oolemmakūt ḷap men jinoin

AKA: A36 / Q235 class

men peḷọk men jerbal
EconomicalPowder / black oxideEasy to machine

Economical structural steel; powder / black oxide / zinc common.

kōļāekkatak ḷap ḷọk

aen kajoor ḷap1

aen būrōrō aen im ko3

aen iaļ

aen iaļ

CNC jek aenemmakūt ḷap men jinoin

AKA: Brass / free-cutting copper alloy

men peḷọk men jerbal
Free-cuttingConductiveFittings / cosmetics

Free-cutting; good conductivity — fittings and cosmetic parts.

kōļāekkatak ḷap ḷọk

jerbal jeḷā men mōṇōṇō7

ABS

ABS

CNC jek aenemmakūt ḷap men jinoin

AKA: ABS engineering plastic

men peḷọk men jerbal
General housingsEasy machiningFixtures

General housings/fixtures; easy to machine.

kōļāekkatak ḷap ḷọk
POM / Acetal

POM / Acetal

CNC jek aenemmakūt ḷap men jinoin

AKA: POM / Delrin-class

men peḷọk men jerbal
Dimensionally stableWear resistantPrecision plastics

Dimensionally stable and wear-resistant for precision plastic parts.

kōļāekkatak ḷap ḷọk
PTFE / Teflon

PTFE / Teflon

CNC jek aenemmakūt ḷap men jinoin

AKA: PTFE

men peḷọk men jerbal
Chemically inertLow frictionLow stiffness

Chemically inert, low friction — low stiffness needs design care.

kōļāekkatak ḷap ḷọk
PEEK

PEEK

CNC jek aenemmakūt ḷap men jinoin

AKA: PEEK high-performance plastic

men peḷọk men jerbal
High tempHigh strengthPremium cost

High-temp/high-strength plastic; premium — for demanding duty.

kōļāekkatak ḷap ḷọk
kōṃṃan ioon men jerbal

jerbal · men ko · iien kōttar-iien men jerbal

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men. Kōļā in AI ej kein jibañ. Wiaik juon men mokta juon ebbōj.

jerbal
jerbal
  • men koaen dik / aen kajoor / aen ejjab rū / men mōṇōṇō
  • iien kōttar men jerbalmen jerbal +0 raan ko (men jerbal men jerbal)
  • jejemen jerbal men jerbal men jerbal; men jerbal ñan men jerbal & jibwe mejen ko.
men dik
men dik
  • men komen jerbal aen dik / aen ejjab rū
  • iien kōttar men jerbal~+1–2 raan ko (men jerbal men jerbal)
  • jejemen jerbal men jerbal; men jerbal ṃokta kōṃṃan ioon aen.
kōṃṃan ioon aen (meram / kilmeej / kajoor)
kōṃṃan ioon aen (meram / kilmeej / kajoor)
  • men koaen ejjab ḷap men jerbal
  • iien kōttar men jerbal~+2–4 raan ko; kōm̧m̧juon men jerbal
  • jejekōnono i lik men jerbal ioon men jerbal; jab ñan aen ejjab rū.
kōṃṃan ioon kajoor
kōṃṃan ioon kajoor
  • men koSS304 / SS316
  • iien kōttar men jerbal~+1–3 raan ko
  • jejemen jerbal rū jab maroñ; men jerbal ippān kōmājej.
bokbok
bokbok
  • men koaen kajoor / aen dik eṃ kajoor ko
  • iien kōttar men jerbal~+3–5 raan ko
  • jejemen jerbal ioon dik; men jerbal kōjpar ko & men jerbal.
kōmājej / men jerbal
kōmājej / men jerbal
  • men koaen ejjab rū / aen ejjab ḷap
  • iien kōttar men jerbal~+1–3 raan ko (men jerbal jikin eṃṃan)
  • jejekōṃṃan ḷọk men jinoin ak Ra men jerbal ñan men jerbal.
men jerbal kōṃṃan ioon ilo jeḷā jāānmen ko & kōṃṃan ioon ko men jerbal

Metals

Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.

Plastics

ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.

Finishes

As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.

Lead-time impact (production clock)

Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.

Compatibility tips

Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.

Certificates

Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.

Capability specs & DFM

ItemSpec
men jerbalMen dron: mōtō, pā, liso, batri. 6061 aluminom. 8–10 raan. Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.
men mōṇōṇōPOM, Nylon, men juon, PTFE (men jerbal men jerbal)
kōṃṃan ioon kojerbal, kōṃṃan ioon aen, men dik, kōṃṃan ioon kajoor, bokbok
men jerbalmen jerbal men jerbal ewōr ñan juon kōṃṃan wia men jerbal
DFM men jerbalPeij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

Related

FAQ

Can I anodize stainless?

Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.

Is hard anodize available?

Yes — selectable as Hard anodize in the quote finish list for aluminum parts.

How many days does finishing add?

Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.

Where do I configure finish for a real part?

On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.

Next: upload CAD or talk to an Engineer

AI Instant Reference Quote + engineering review within 12 business hours.

Get a QuoteFAQ5-axis jek aen
AIjeḷājāānjeje tok
PDF

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

Peij in ej kōļā in CNC. Kōnono kein, 6061 aluminom ak kōm̧ool ejjab rūre, likit jebweb ilo pikja, im bwin. Raan eo 8–10, jān juon men.

CNC Materials & Finishes Atlas | Anodize Blast Passivate Powder