Aluminum 6061
Wanda aka fi sani da: Al6061-T6 / EN-AW6061
Muhimman halaye
Jirgin aikiAna iya waldaMai araha
Aluminum mai ƙarfi (Mg-Si); matakin da aka saba a cikin maganganu.
Zoryra Precision
CNC Kayan aiki & Ƙarewa a Dongguan, China | Zoryra Precision
Zoryra Kayan aiki masu daidaito da ƙarewa a Dongguan, China: 6061/7075, 304/316, POM; anodize, fashe, passivate, foda a zaɓi. Kwanakin ƙarewa suna kan agogon jagora. Babu ISO da aka ƙirƙira.
Kayan masana'antu
Zaɓi darajoji da suka dace da aikin ku
Ana iya zaɓar waɗannan darajoji a cikin Zoryra Precision AI Instant Quote. Filtro ta iyali + tsari. Wani darajoji ba su bayyana ba (misali karfe na musamman don kayan aiki)? Aiko imel zuwa [email protected] ko ku yi magana da injiniya.
Gamawa (anodize / blast / passivate / powder) suna cikin atlas da ke ƙasa — daidaita gamawa da kayan (ba a yin anodize a kan bakin ƙarfe).
Tace ta iyaliNuna 25 matakai
Aluminum6
Aluminum 6082
AKA: Al6082 / EN-AW6082
Muhimman halaye
Matsakaicin ƙarfiƘarfafa yanayin zafiAna iya walda
Matsakaicin ƙarfi tare da kyakkyawan weldability/conductivity na thermal don tsarukan.
Aluminum 5052
AKA: Al5052 / mashahurin takardar ƙarfe
Muhimman halaye
Juriya ga lalataMai jujjuyawaHousings
Juriya ga lalacewa; gama gari don gidajen lanƙwasasshen takarda da ƙananan CNC.
Aluminum 5083
AKA: Al5083 / juriyar lalata mai inganci don ruwa
Muhimman halaye
Babban juriya ga lalataƘarfi mai kyauJigon faranti
Matsakaicin ƙarfi, babban juriya ga lalacewa don faranti/tsaruka.
Aluminum 7075
Wanda aka fi sani da: Al7075-T6 / EN-AW7075
Muhimman halaye
Ƙarfi mai yawaJuriya ga gajiyaYana aiki da kyau
Al simintin mai ƙarfi don ƙananan abubuwa masu ɗaukar nauyi / gajiya; yana aiki da kyau; akai-akai ana yin anodized.
Aluminum 2024
AKA: Al2024 / ƙarfin ajin sararin sama
Muhimman halaye
Ƙarfi mai yawaAyyukan gajiyaƘarancin yiwuwa walda
Aluminum mai ƙarfi na jiragen sama; iyakancewa welding — tabbatar da yanayin zafi a zane.
Baƙin ƙarfe maras tsatsa4
Baƙin ƙarfe 304
AKA: SS304 / 1.4301
Muhimman halaye
Bakin ƙarfe gaba ɗayaPassivate OKBabu anodize
Baƙin ƙarfe na gama-gari; tsaftace/ɓoye — kada a anodize.
Baƙin ƙarfe 316
AKA: SS316 / mafi kyawun juriya ga lalata
Muhimman halaye
Mafi kyawun juriya ga lalataKiwon lafiya / dakin gwaje-gwaje gama gariPassivate OK
Mafi kyawun juriya daga lalacewa fiye da 304; gama gari a kayan aikin kiwon lafiya/laboratory.
Bakin 303
AKA: SS303 / mai sauƙin sarrafawa
Muhimman halaye
Injin kyautaƘananan sassan ƙaraDaidaita/miling abokantaka
Baƙin ƙarfe mai sauƙin sarrafawa don ƙananan sassa masu juyawa/ƙira a yawan.
17-4PH bakin
AKA: 17-4PH / 1.4542
Muhimman halaye
Ƙarfafawa ta hanyar zaɓaƘarfi mai yawaKira yanayin
Karfe mai ƙarfi saboda zafi; nuna yanayin magani na zafi a zanen.
Ƙarfe4
Karfe mai sauƙi
AKA: A36 / ajin Q235
Muhimman halaye
ArzikiFoda / bakin oxideSauƙi a injina
Karfe mai tsada kuma mai ɗorewa; foda / baƙin oxide / sink na gama gari.
1045 carbon karfe
AKA: 1045 / C45
Muhimman halaye
Matsakaicin carbonShaftsAna iya juyar da zafi
Karfe mai carbon matsakaici; mafi ƙarfi fiye da karfe mai laushi — gama gari don sanduna.
4140 gami karfe
AKA: 4140 / ajin 42CrMo
Muhimman halaye
Ƙarfi mai yawaKaushi / tasiriTabbatar da juyar da zafi
Karfe mai haɗin gwiwa; tabbatar da maganin zafi tare da injiniya.
Kayan aiki karfe (general)
AKA: ajin ƙarfe na kayan aiki gaba ɗaya
Muhimman halaye
Juriya ga sawaRukuni kayan aikiBayyana daraja a cikin rubutu
Ajin kayan sawa/kayan aiki — bayyana ainihin ajin a cikin bayanai (SKD / S136 da sauransu ta hanyar injiniya).
Titanium1
Ti-6Al-4V titanium
AKA: TC4 / Grade 5
Muhimman halaye
Ƙarfi mai yawa dangane da nauyiHaskeSaurin aiki da ƙarancin sauri
Ƙarfi mai girma da nauyi mai sauƙi; yankewa a hankali — dubawa ta injiniya don sassa masu rikitarwa.
Haɗaɗɗun tagulla3
Ввввввввввввввввввввввввввввввввв
AKA: Brass / haɗin ƙarfe na tagulla mai sauƙin yanka
Muhimman halaye
Yanke kyautaMai ɗaukar wutaKayan aiki / kyawawan fasali
Sauƙin yanka; kyakkyawan isar da wutar lantarki — fittings da sassa na kwalliya.
Tagulla
AKA: Bronze
Muhimman halaye
Juriya ga sawaBushingsRubuta daidai daraja
Gama gari don bushings masu sawa — lura da ainihin ajin idan an buƙata.
Tagulla C110
AKA: C110 / tagulla ETP
Muhimman halaye
Ƙarfafa wutar lantarkiZafiNa'urorin wutar lantarki / na'urorin dumama
Babban ja-gora ga sassan zafi/na lantarki.
Filastik na injiniya7
ABS
WANDA AKA SAN SHI DA: Filastik na injiniya ABS
Muhimman halaye
Gidaje gaba ɗayaSauƙin sarrafawaNa'urorin haɗi
Gidaje/na'urorin gabaɗaya; mai sauƙin sarrafawa.
Naylon (PA)
WANDA AKA SAN SHI DA: PA / Nailan
Muhimman halaye
KaushiGears / slidersƘara danshi
Mai ƙarfi ga gears/sliders — kula da kumburin ruwa a haduwa.
POM / Acetal
WANDA AKA SAN SHI DA: POM / aji Delrin
Muhimman halaye
Mai daidaito a girmaJuriya ga sawaFilastik na ƙwarewa
Tsayayye a girma kuma juriya ga lalacewa ga sassan filastik masu daidaito.
Polycarbonate (PC)
WANDA AKA SAN SHI DA: PC
Muhimman halaye
Zaɓuɓɓuka masu bayyanaƘarfi na bugun tasiriKulawa da fashewar damuwa
Ana iya samun gidaje masu bayyana/marasa launi — kula da yaga saboda matsa lamba.
Acrylic / PMMA
WANDA AKA SAN SHI DA: PMMA / acrylic
Muhimman halaye
Na'urar gani / nunawaMai iya shafaRaunin kallo
Sassan gani/nuni; gefuna za a iya gogewa.
PTFE / Teflon
WANDA AKA SAN SHI DA: PTFE
Muhimman halaye
Babu tasiri a sinadaraiƘananan gogayyaƘarancin tauri
Ba ya amsawa da sinadarai, ƙaramin gogayya — ƙaramin ƙarfi yana buƙatar kulawa a ƙira.
PEEK
WANDA AKA SAN SHI DA: PEEK filastik mai aiki da kyau sosai
Muhimman halaye
Zafin jiki mai yawaƘarfi mai yawaFarashin mai tsada
Filastik mai zafi mai yawa/mai ƙarfi; na al'ada — don aikin da ke buƙata sosai.
Ƙarshen atlas
Tsari · kayan aiki · tasirin lokacin jagora
Masu saye suna zaɓar kammalawa cikin gani. Kwanaki suna matsayin ƙara na tunani — faɗakarwa ta raba su. Polishi, bushe, chromate, zinc plate, baki oxide, electropolish, nickel plate, juya, da fenti kowanne yana da shafi kuma ana iya zaɓar su a cikin faɗakarwa.
- Kayan aikiAl / ƙarfe / bakin ƙarfe / filastik
- Tasirin jagoraYawanci +0 kwanaki (na gani mafi sauri)
- LuraAlamomin kayan aiki suna bayyana; mai kyau don ciki & fuskar da suke hade.
- Kayan aikiYawanci Aluminum / bakin karfe
- Tasirin jagora~+1–2 kwanaki (ya dogara da layi)
- LuraEven matte; na gama gari kafin anodize.
- Kayan aikiAluminum kadai
- Tasirin jagora~+2–4 kwanaki; anodize mai wuya ya fi ɗauka lokaci
- LuraKira don rufe akan kayan kwalliya; ba don bakin karfe ba.
- Kayan aikiSS304 / SS316
- Tasirin jagora~+1–3 kwanaki
- LuraYana inganta juriya ga tsatsa; akai-akai tare da goge.
- Kayan aikiƘarfe / tsarukan Aluminum
- Tasirin jagora~+3–5 kwanaki
- LuraFina-finai mai kauri; rufe zaren & daidaitawa.
- Kayan aikiBakin karfe / Aluminum
- Tasirin jagora~+1–3 kwanaki (na kyau don kayan kwalliya)
- LuraAika samfurin ko Ra manufa don kayan kwalliya.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| Karafa | 6061 / 7075 Al, 304 / 316 SS, ƙarfe, tagulla |
| Filastik | POM, Nylon, PC, PTFE (samun ya bambanta) |
| Kammala | Kamar yadda aka sarrafa, anodize, bead blast, passivate, shafa foda |
| Takardun Shaida | Takardun shaida na kayan suna akwai bisa yarjejeniyar oda |
| Shawarwarin DFM | Daidaici ƙarewa da aiki — anodize na ado yana buƙatar bayanan rufe fuska |
Waɗanda ke sarrafa injina, da kuma inda
Sassa ne factory kai tsaye daga Dongguan Zerui daidaici Manufacturing Co., Ltd. a Dongguan, kasar Sin, Guangdong. Alamar waje: ZORYRA / Zoryra daidaici.
Daga 1 pc. Bayan CAD upload ka samu wani AI itemized tunani; m umarni bi zane da kuma yarda biya node. Оооооооооооооооооооооооооооооооооооооооооооооооооооооооовввввввввввввввввввввввв
Wannan shafin ya nuna babu lambobin ISO / AS / FDA da aka ƙirƙira. Оооооооооооооооооооооооооооооооооооооооооооооооооооооооовввввввввввввввввввввввв Za a iya shirya ziyarar masana'antu.
Zoryra Kayan aiki masu daidaito da ƙarewa a Dongguan, China: 6061/7075, 304/316, POM; anodize, fashe, passivate, foda a zaɓi. Kwanakin ƙarewa suna kan agogon jagora. Babu ISO da aka ƙirƙira.
Kayan aiki da ƙarewa a Dongguan, China: 6061/7075, 304/316, POM shirye don farashi. Anodize, fashe, passivate, foda kamar yadda aka duba — kwanaki akan agogon jagora. Bako ba a anodize. Takaddun kayan aiki bisa odar.
Sassa na yau da kullum
- Aluminium anodized
- Sassa masu fashe bead
- Bako passivated
- Maballan da aka rufe da foda
- Fuskokin da aka sarrafa a injin
- Tsarin rufi mai wuya
Kayan aiki & gamawa
- 6061 — Anodize OK
- 7075 — Rufi mai wuya OK
- 304 — passivate, ba anodize ba
- POM — Kamar yadda aka sarrafa a injin
DFM: toshewa, kaurin rufi, fuskar da ke hade
- Daidaita kammala da aiki; anodize na kyan gani yana bukatar bayanan maski
- Alamar zaren da kasa
- Kada a anodize bakin ƙarfe
- Kwana na kammalawa suna zaune a kan agogon jan ƙarfe
Bincike da takardu (kamar yadda aka alama)
- Rahoton girma kamar yadda aka nuna
- FAI kamar yadda aka duba
- CMM kamar yadda aka duba
- Takardun shaidar kayan bisa yarjejeniyar oda
Lokacin jagora (agogo yana farawa a wurin biya)
Matakan jagorar lokaci: Tattalin Arziki / Matsakaici / Gaggawa. Matsakaici kusan kwanaki 10 na aiki a matsayin tunani; Gaggawa kusan 6 idan ƙarfin aiki ya ba da dama.
Agogo yana fara a wurin biya da aka amince da shi. Ranar anodize, foda, passivate, da wutar waje suna ci gaba a wannan agogo.
Titanium, kauri mai wuya, saka kayan, da ma'auni masu rikitarwa suna sake saita agogo. Zanen farashi yana jagorantar.
Abin da ba mu yi ba
- Bakin ƙarfe ba a anodize
- Babu ISO da aka kirkira
- Kwana na kammalawa a kan agogon jan ƙarfe
- Musamman/Pantone daidaituwa yana buƙatar yarjejeniyar injiniya
FAQ
Shin kuna lissafa lambobin ISO / AS / FDA anan?
Babu lambobin kirkira. Tsarin da ba mu riƙe ba ba a rubuta su a matsayin an riƙe ba. Ana iya tsara ziyarar masana'anta.
Shin kuna karɓar guda 1?
Iya. Bayan CAD, za ku sami AI mai jerin abubuwa; odar ƙwararriya tana bin zanen da kuma hanyar biyan kuɗi.
Yaushe agogon ja zai fara?
A lokacin da aka amince da biyan kuɗi. Rana na anodize, powder, da passivate suna tsaye a kan agogo. Matakan a cikin kiran farashi: Tattalin arziki / Tsakiyar / Gaggawa.
Shin za a iya anodize bakin ƙarfe?
A’a. Yi passivate ko goge madadin.
Shin kwanakin kammalawa sun haɗa da na jan ƙarfe?
Iya. Anodize, foda, passivate suna kan agogo.
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.