How to Reduce CNC Machining Cost
Practical DFM tips to lower CNC cost: tolerances, materials, setups, and finishes.
6 min readpezzu
DFM & technical blog
Practical notes for buyers and engineers to quote manufacturable parts faster.
Aluminum vs Stainless Steel for CNC Parts
Choose aluminum or stainless for CNC: weight, corrosion, cost, and machining time.
5 min readDFM Checklist Before You Upload CAD
A short DFM checklist for buyers before uploading CAD for CNC quote.
4 min readCase: Robotics EOAT Plate — Al6061, ±0.02 mm, Standard ~10 Days
Representative CNC case: Al6061 EOAT plate, fit faces ±0.02 mm, clear anodize, Standard tier ~10 days (production + air sketch).
5 min readCase: 5-Axis Al7075 Housing — ±0.01 mm, Express ~6 Days
Representative 5-axis case: Al7075 housing, compound angles, ±0.01 mm datums, Express ~6 days reference.
6 min readCase: Electronics Heat Spreader — Al6061, Flatness 0.05, Standard ~10 Days
Representative electronics case: Al6061 heat spreader, flatness 0.05 mm, cutouts ±0.05, Standard ~10 days.
5 min readCase: UAV Arm Connector — Al6061 Pocketing, Standard ~10 Days
Representative UAV case: Al6061 arm connector with pocketed weight reduction, ±0.05 mm fits, clear anodize, Standard ~10 days reference.
5 min readCase: UAV Brushless Motor Mount — Al6061, Black Anodize, 20 pcs
UAV motor mount case: Al6061 brushless mount, M3 bolt circle ±0.05 mm, black anodize, masked threads, Standard ~10 days reference.
5 min readCase: UAV Gimbal Camera Bracket — Damping Face, Clear Anodize
UAV gimbal bracket: Al6061 camera mount with flat damping face 0.05 mm, masked bores, clear anodize, 8 pcs reference.
4 min readCase: UAV Battery Tray Slide Rail — Thin-Wall Pocketing, 15 pcs
UAV battery tray: Al6061 slide rails with latch slots, thin-wall DFM ≥1.2 mm, clear anodize, 15 pc batch reference.
4 min readProblem: EOAT Datum Stack Won’t Assemble — Fix Before You Reorder
Robotics EOAT plates fail stack-up when datums and inserts are vague. Short DFM fixes + upload path for instant quote.
4 min readProblem: Lab Fixture Audit Stalls Without Dim Reports — What to Select
Non-implant medical/lab CNC: pick dimensional reports, CoC, FAI, NDA at quote time — no invented cert numbers.
4 min readProblem: EV Fixture Calendar Slips After Coating — Split the Clock
Automotive / EV CNC fixtures: coating days belong on the production clock — quote shows production vs shipping separately.
4 min readProblem: Drone Thin Walls Chatter or Crack — Pocket Without Scrap
UAV / drone aluminum CNC: thin-wall pocketing, weight targets, and anodize notes before you cut the frame.
4 min readProblem: Heat Spreader Flatness Fails After Anodize — Mask the Thermal Face
Electronics heat-spreader CNC: keep anodize off the thermal face, call out flatness, and quote finish days separately.
4 min readProblem: Finish Adds a Silent Week — Masking Notes That Save Scrap
CNC finish lead-time: blast / anodize / powder days on the production clock, plus masking tips for threads and mating faces.
4 min readProblem: AI Cold Plate Flatness Fails After Finish — Keep the Thermal Face Clean
AI / GPU cold-plate CNC: thermal flatness, masking, aluminum vs copper notes — then upload STEP for quote.
4 min readCase: Medical Instrument Bracket — SS316, Passivate, ±0.02 mm, Standard ~12 Days
Non-implant medical CNC case: SS316 bracket, critical fits ±0.02 mm, passivation, inspection optional, Standard ~12 days reference.
5 min readCase: Automotive Trial Fixture Base — Al6061, Pin Pattern ±0.02, Express ~7 Days
Automotive trial fixture CNC: Al6061 base plate, dowel pattern ±0.02 mm, wear notes, Express ~7 days — not OEM homologation narrative.
5 min readCase: AI GPU Cold Plate — Al6061, Flatness 0.05, Standard ~10 Days
AI hardware CNC case: Al6061 cold plate, thermal flatness 0.05 mm, masked finish, Standard ~10 days — copper optional with lead buffer.
5 min read