Aluminium 6061
Narafala nem: Al6061-T6 / EN-AW6061
Ol Impoten Samting We Oli Stap
Bigfala PaoaWeldimOli Stap Praes
Bigfala aluminium (Mg-Si); Ol komon defaolt level long ol kwotesen mak.
Zoryra Precision
Ol CNC Material mo Surface Tritmen long Dongguan, Jaena | Zoryra Precision
Zoryra Precision Ol Samting mo Finis long Dongguan, Jaena: 6061/7075, 304/316, POM; Anodizing, blasting blong sanbij, pasifolem paoda, paoda we i stap long hem. Long en dei, sidaon long wan bel we i led. I no gat wan samting we i kamaot long ISO.
Ol Man Blong Wokem
Jusum Level we i Stret Long Projek Blong Yu
Ol level ia oli save jusum long Zoryra Precision AI kwotesen. Jusum folem famle + proses. ? I no gat mak (olsem ol spesel aean)? Sendem imel i go long [email protected], o storian wetem wan enjinia.
Surface tritmen (anodizing/sandblasting/passivation/pauda) long atlas daon—Surface tritmen i stret wetem ol samting (i no gat anodizing long steinles stiel).
Jekem From FamleSoem 25 level
Aluminium6
Aluminium 6082
Wan narafala nem: Al6082 / EN-AW6082
Ol Impoten Samting We Oli Stap
Strong We i StrongHat i save lidim ol samtingWeldim
I strong tumas, i gat gudfala welding/hot conductivity, mo i stret long ol bilding.
Aluminium 5052
Wan narafala nem: Al5052 / Favorite Blong Speet Metal
Ol Impoten Samting We Oli Stap
Fasin Blong Stap Blong RosenFren Blong BenOl sel
fasin blong blokem fasin blong roten; Plante taem oli yusum long ol sel we oli ben mo ol laet CNC.
Aluminium 5083
Mo tu: Al5083/Marine Klas Corrosion Resistance
Ol Impoten Samting We Oli Stap
Bigfala Rosen i Stap StrongStrong We i StrongOl plet
Smol strong, bigfala resistens long korosen blong ol buk/strakja.
Aluminium 7075
Narafala nem: Al7075-T6 / EN-AW7075
Ol Impoten Samting We Oli Stap
I strong tumasFaet Blong TaedWel Blong Masin
aluminium we i gat hae paoa blong yusum long ol haf blong bilding/taed; ol wel blong masin; Plante taem, hem i anodized.
Aluminium 2024
Mo tu: Al2024/Aerospace Klas Strong
Ol Impoten Samting We Oli Stap
I strong tumasTaed i StapSmol Weld We i Stap
Aluminium we i gat hae paoa long plen; Welding Co., Ltd.—Konfemem fasin we i stap long ol droing.
Stainles aeel4
Stainles ael 304
Narafala nem: SS304 / 1.4301
Ol Impoten Samting We Oli Stap
Ol stainles aeelOK BLONGOksidaesing i no gat anodic
Stainles ael we i no gat ples; Ol man we oli mekem i kam antap long hem, oli no mekem i kam antap long hem.
Stainles ael 316
Mo tu: SS316/Moa Blong Rosen Resistens
Ol Impoten Samting We Oli Stap
Moagud Blong Stanap Strong Long KorosenOl Medikin/Laboratori Ol JeneralOK BLONG
Moagud fasin blong stanap strong long korosen bitim 304; Plante taem oli yusum long ol medikol/laboratori hadwea.
Stainles aeel 303
Mo tu: SS303 / Free Maching
Ol Impoten Samting We Oli Stap
Wok Fri Blong WokOl Smol HafFren Blong Tanem/Mil
Ol steinles aean we oli yusum blong tanem mo milim ol smol haf blong smol haf.
17-4PH stainles aeel
Wan narafala nem: 17-4PH / 1.4542
Ol Impoten Samting We Oli Stap
Ol Man We i Kam StrongI strong tumasStap Kros
Stainles aean we i mekem i strong, i kam strong; Long ol pija, i soemaot ol samting we oli save mekem i hot.
Aeel4
Aeel we i no gat smol kabon
Narafala nem: A36 / Q235
Ol Impoten Samting We Oli Stap
ManePaura/Blak OsaedI isi nomo blong wokem
Ol aeel we i no strong tumas; Paura/Blak Oksaed/Odinari Zinc.
1045 kabon aeel
Wan narafala nem: 1045/C45
Ol Impoten Samting We Oli Stap
Kabon i go long medelSafolHat i save tritim
aeel blong kabon we i medel; I strong moa i bitim ol aean we oli no gat plante kabon—plante taem oli stap long ol shaft.
4140 aean we i gat aloi
Narafala Nem: 4140/42CrMo
Ol Impoten Samting We Oli Stap
I strong tumasStap Strong/SpaoaKonfemem Tritmen Blong Hat
Aloy konstraksen aeel; Yusum enjinia blong konfemem fasin blong tritim hot.
Ol tul aeel (plante taem)
Mo tu: Jeneral Tul Aeel Grade
Ol Impoten Samting We Oli Stap
Save FaenemOl TulTokbaot wan level long ol not
Wear/Tul Grade—Talemaot stret mak long ol not (SKD/S136, mo ol narafala samting).
Taitanium1
Titanium—6Al-4V Titanium
Mo tu: TC4/5
Ol Impoten Samting We Oli Stap
Hevi we i strong tumasLONG LONGSlou We Oli Wokem Wok
Hevi we i strong tumas; Ol enjinia oli lukluk long ol haf we i had tumas, oli slo.
Aloy blong Kopa3
Bras
Mo tu: bras/kopa aloi we i isi blong katem
Ol Impoten Samting We Oli Stap
Fri KatemOl Man We i Mekem LektrikOl Samting We Ol Samting We Oli Stap Flas
fri blong katem; Gudfala fasin blong konduktem lektrik—ol samting mo ol haf blong lukluk.
Bras
Ol man we oli save olsem: Bras
Ol Impoten Samting We Oli Stap
Save FaenemOl KasetTokbaot stret level
Plante taem, ol klos we oli no save werem, oli no save werem—Yu mas raetem stret mak taem yu nidim.
Kopa C110
Sam narafala nem: C110/ETP kopa
Ol Impoten Samting We Oli Stap
Bigfala Lektrik i MekemHotElektrik/redieta
Ol haf blong hot/lektrik oli save lidim paoa blong mekem paoa.
Ol Plastik Blong Wokem Ol Man7
ABS
Mo tu: ABS Engineering Plastik
Ol Impoten Samting We Oli Stap
Ol Jeneral HaosI isi nomo blong wokemOl fasin blong kasem
Ol jenerol sel/fasin; I isi nomo blong wok.
Naelon (PA)
Narafala Nem: PA/Naelon
Ol Impoten Samting We Oli Stap
Strong HaeGia / SlaidaWota i kam antap
I had long ol gia/slaeda—lukluk se wota i kam antap long ples ya we i joen wetem hem.
Polyformaldehyde/acetal
Mo tu: POM/Delrin klas
Ol Impoten Samting We Oli Stap
Smol i Stap StapSave FaenemOl Plastik We Oli Stret
Ol smol samting oli stap strong mo oli no save werem, mo oli stret blong yusum ol haf blong plastik we oli stret.
Polikarbonet (PC)
Ol i kolem tu se: PC
Ol Impoten Samting We Oli Stap
Ol Jus We Oli KasemStap Strong Blong KamStres Crek Lukaot
Ol sel we oli klia mo oli klia, oli save luksave se oli brekem ol samting we oli stap long hem.
Akrilik/PMMA
Narafala Nem: PMMA/Akrilik Asid
Ol Impoten Samting We Oli Stap
Ol Laet/SpleiOl Man We Oli PolisimWat i No Stap Stap
Ol haf blong optikol/soem; Ol saed oli save polisim.
PTFE / Teflon
Wan narafala nem: PTFE
Ol Impoten Samting We Oli Stap
Ol Kemikol We Oli StapSmol FraetSmol Stap
Ol kemikol we oli no strong tumas, oli no gat smol friksen—oli mas lukaot gud long ol samting we oli wokem
PEEK
Mo tu: PEEK Plastik We Oli Wokem Hae
Ol Impoten Samting We Oli Stap
Hem i hot tumasI strong tumasOl Praes blong Insurens
Ol plastik we oli gat hae tempereja/we oli gat hae paoa; Praes blong insurens—wan strong responsabiliti.
Komplitim Atlas
Ol Wok, Ol Samting, Mo Ol Samting We Oli Stap Fastaem
Ol man we oli pem, oli jusum ol samting we oli lukluk. Skae i yusum ol man we oli ademap, hemia ol mak we oli seraotem olgeta. I gat wan pej blong polisim, droem waya, kromate, zinc pej, blak oksaed, lektropolisim, nikel pej, rolem, mo pentem, mo yu save jusum long saed blong praes blong olgeta.
- Ol Samting BlongAluminium/Stiel/Stainles Ael/Plastik
- Lida i StapPlante taem + 0 dei (Kosmetik we i spid moa)
- Toktok Blong Ol Manmak blong ol tul we oli luk; Hem i givhan long ol narafala insaed mo long narafala.
- Ol Samting BlongBighaf long aluminium/stainles aean
- Lida i Stap~+ 1-2 dei (i dipen long laen)
- Toktok Blong Ol ManIven matte; Plante taem oli stap hapen bifo we oli anodizing.
- Ol Samting BlongAluminium nomo
- Lida i Stap~+ 2-4 dei; Ol strong anodizing oli stap longtaem moa
- Toktok Blong Ol ManYu askem blong kavremap ol samting we oli naes long hem; I no stret long stainles aean.
- Ol Samting BlongSS304/SS316
- Lida i Stap~+ 1-3 dei
- Toktok Blong Ol ManMekem moa fasin blong blokem fasin blong kam nogud; Plante taem oli yusum lanwis blong Polan.
- Ol Samting BlongAeel/Aluminium Bilding
- Lida i Stap~+ 3-5 dei
- Toktok Blong Ol ManTik film; Ol mask tred mo fasin we i joen wetem.
- Ol Samting BlongStainles ael/aluminium
- Lida i Stap~+ 1-3 dei (klas blong ol kosmetik)
- Toktok Blong Ol ManSendem sam sempol blong ol kosmetik, o mak blong Ra.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| Aeon | 6061/7075 aluminium, 304/316 stainles ael, ael, bras |
| Plastik | POM, Naelon, PC, PTFE (Ol Defren Samting Blong Save) |
| Flasem Ol Man | Masin, anodizing, masin, masin |
| Setifiket | Givim Setifiket Blong Oda Aninit long Oda |
| Ol DFM We Oli Tingbaot | Finis mo Wok We i Stret—Ol Wok Blong Lukluk We i Mekem Anodizing Ol Wok |
? ?
Ol pat oli kam stret long Dongguan Zerui Precision Manufacturing Co., Ltd., long Dongguan, Guangdong, Ol narafala bren: Zoryra/Zoryra Precision.
Stat wetem 1. Afta we yu putim CAD, bae yu kasem wan refrens blong AI; Mekem se oda ia i folem ol droing mo ol node we oli agri long hem blong pem. Mifala i no giaman olsem ol foto blong ol fektori blong namba tri man olsem ol prodak laen blong mifala.
Pej ia i no soem ol stori namba blong ISO/AS/FDA. Ol sistem we yumi no holem, oli no raetem se i holem. Yu save mekem plan blong visitim ol faktori.
Zoryra Precision Ol Samting mo Finis long Dongguan, Jaena: 6061/7075, 304/316, POM; Anodizing, blasting blong sanbij, pasifolem paoda, paoda we i stap long hem. Long en dei, sidaon long wan bel we i led. I no gat wan samting we i kamaot long ISO.
Long Dongguan, Jaena, Ol Samting We Oli Fasem: 6061/7075, 304/316, POM Quotation Rere. Anodizing, blasting blong sanbij, skelem paoda—Ol dei we oli stap long klok. Ol steinles aean oli no gat anodizing. Setifiket blong ol samting blong wanwan oda.
Ol Haf We Oli Stap
- Anodized alumina oxide
- Ol haf blong sut we oli sut
- Stainles aean we i no gat plante samting
- Ol paoda we oli putum long paoda
- Fes Blong Mekem
- Strong Koting We i Strong
Ol Samting We Oli Fasem Ol Samting
- 6061 — Anodized OK
- 7075 — Strong Koting OK
- 304 — Ol man we oli stap mekem i no moa gat anodized
- POM — Wokem Masin
DFM: Kava, Tiknes blong Koting, Ol Faet We Oli Faet
- Finis mo wok we i joenem; Ol samting we oli mas lukaotgud long fasin blong kasem ol samting we oli naes long hem, oli mas
- Makem ol rod mo fon long graon
- No Stainles Aeel We i Stainles Aeel
- Deit Blong Finis i Stap Long Fas Klok
Ol inspeksen mo ol pepa (olsem long mak blong mak)
- Ripot Blong Dimensen Oli Jekem
- Jekem faea
- Jekem CMM
- Ol Setifiket Blong Wanwan Oda Agrimen
Fastaem (klok i stat wetem node blong pem)
Klas blong Lida: Ekonomi Klas/Standard Klas/Fast Klas. Standet ia i blong samwe 10 dei blong wok blong hem; Sipos ol man oli gat raet, oli talem samwe long sikis wod.
Klok ia i stat wetem wan node we i agri blong pem. Long klok ia, ol dei blong anodizing, paoda, ol samting we oli mekem, mo ol samting we oli yusum long hot, mo ol samting we oli yusum long hem.
Titanium, ol had koting, ol insaed, mo ol had instrument, oli jenisim taem bakegen. Ol kwotesen oli gat paoa long paoa.
Ol Samting We Yumi No Mekem
- Stainles aeel i no gat anodized
- Ol ISO we oli no wokem
- Finisim Namba Blong Dei Long Faswan Klok
- Spesel/Pantone Matching i nidim wan protokol blong enjiniaring
FAQ
Yu yu stap listim ol namba blong ISO/AS/FDA long ples ia?
I no gat ol stori namba. Ol sistem we yumi no holem, oli no raetem se oli holem. Yu save mekem plan blong visitim ol faktori.
? Yu yu wantem wan pis?
Yes. Afta long CAD, bae yu kasem wan smol refrens blong AI; Mekem se oda ia i folem ol node blong karemaot mane mo pem.
? Wetaem bel ya i stat?
Long taem blong pem pei node we oli agri. Ol dei blong anodizing, paoda, mo ol dei we oli no save mekem, oli sidaon long klok. Kotesen Level: Ekonomik Klas/Standet Klas/Ekspresi Klas.
? Olsem wanem? Stainles aean i save anodizem?
Nogat, i tekem ples blong hem blong mekem ol samting we oli no foldaon
? Yu ting se namba blong ol dei we oli finisim, i kaontem wan samting we
Yes. Anodizing, paoda, pasin blong sidaon long klok.
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.