2026-08-10 · 4 min

Problem: Heat Spreader Flatness Fails After Anodize — Mask the Thermal Face

Problem: Al6061 heat spreaders meet thickness in-process, then after clear/black anodize the thermal face bows past 0.05 mm and TIM contact dies.

Root cause: whole-part anodize with no masking; powder coat chosen for cosmetics even though film thickness hurts conduction.

Fix: as-machined thermal face + anodize only non-contact sides; put flatness and cutout tolerances on the PDF; sample flatness before ship.

Lead sketch: Standard ≈ 8–10 days with finish; skip powder on contact plates.

Upload STEP + PDF on the quote page — pick finish carefully, then open the electronics industry page for EMI / cover siblings.

Upload CAD for an itemized reference Back to blog

Ixabisole-AI Email

PDF

I-imeyile yomsebenzi iyathandwa ([email protected]). I-imeyile yomntu iyavunyelwa. Ngokuzithandela — ukukhuphela kusebenza.

Siza kusebenzisa le imeyile yomsebenzi kuphela ukuthumela le nto kunye nokuphendula imibuzo yakho yobunjineli (ixabiso, ixesha lokuikhokela, imizobo).

Ngokuzithandela: ungathumela kamva i-imeyile ngemiyalelo eminye yomsebenzi, izinto, okanye amanqaku exesha lokuikhokela. Akuyiyo intengiso. Akuyiyo ubulungu. Shiya ungakholisi ukuba ufuna le mpendulo kuphela.

Problem: Heat Spreader Flatness Fails After Anodize — Mask the Thermal Face — Zoryra Precision

Problem: Heat Spreader Flatness Fails After Anodize — Mask the Thermal Face

Related pages