Typiska detaljer
Payload and instrument brackets · Satellite bus interface plates · Ground-support and handling fixtures · Separation and fit-check plates
Zoryra Precision
Commercial Space CNC Parts | Zoryra Precision
We machine brackets, plates, and ground fixtures around commercial launch and satellite hardware. The drawing sets the fit. Flight-critical and ITAR work is not the default scope.
- NDA on request
- Optional FAI / CMM
- Aluminum and stainless first
- Material certs when asked
Commercial space buyers usually need a small batch of aluminum or stainless interfaces: payload mounts, separation-test plates, antenna check fixtures, and ground-support brackets. Upload STEP and PDF, pick material and inspection, and the quote lists the machining features.
We do not claim flight heritage, launch records, or a wall of aerospace certificates. If a job needs a special alloy, a material cert, or a first-article report, say so on the RFQ and we confirm it before cutting.
Varför Zoryra · Commercial Space CNC Parts | Zoryra Precision
Toleransvägledning (ritningen gäller)
Mating faces often ±0.02–0.05 mm. Tighter datums follow the drawing. Optional CMM or FAI can be added on the quote.
Att tänka på
NDA on request · Optional FAI / CMM · Aluminum and stainless first · Material certs when asked
Typiska detaljer
- Payload and instrument brackets
- Satellite bus interface plates
- Ground-support and handling fixtures
- Separation and fit-check plates
- Antenna and sensor check mounts
- Pocketed lightening brackets
Toleransvägledning (ritningen gäller)
Mating faces often ±0.02–0.05 mm. Tighter datums follow the drawing. Optional CMM or FAI can be added on the quote.
Att tänka på
- Say early if the part is only for ground test
- Call out inspectable dimensions and insert types
- Do not treat this page as a flight-approval claim
Relaterat
Vanliga frågor
Do you machine flight hardware for commercial launch?
Default work is ground tooling, interface plates, and non-flight brackets. Flight-critical parts are not accepted as a standard job. Ask engineering before sending that kind of drawing.
Which files should we upload?
STEP plus a PDF with tolerances, material, and finish. Mark the faces that must be inspected.
Ladda upp CAD för specificerad referens
Direkt referensoffert + ingenjörsgranskning inom 12 arbetstimmar.
Andra branscher
Robotik och automationFabriken i Dongguan, China för Robotik och automation. Ladda upp STEP / STL / IGES — från 1 st.MedicinFabriken i Dongguan, China för Medicinteknik och lab. Ladda upp STEP / STL / IGES — från 1 st.AutomotiveFabriken i Dongguan, China för Fordon och EV. Ladda upp STEP / STL / IGES — från 1 st.UAV / dronesFabriken i Dongguan, China för Drönar- / UAV-strukturer. Ladda upp STEP / STL / IGES — från 1 st.Elektronik och halvledareFabriken i Dongguan, China för Elektronikhårdvara. Ladda upp STEP / STL / IGES — från 1 st.AI hardwareFabriken i Dongguan, China för AI-hårdvara. Ladda upp STEP / STL / IGES — från 1 st.