Case: UAV Arm Connector — Al6061 Pocketing, Standard ~10 Days

Part type: quadcopter arm-to-frame connector with pocketed weight reduction and motor-mount bolt pattern.

Material: Al6061-T6. Finish: clear anodize on exterior; as-machined on arm mating face. Qty: 12 pcs pilot.

Tolerances: arm bolt circle ±0.05 mm; bearing bore H7 where drawn; wall thickness ≥1.2 mm after pocketing per DFM note.

Process: 3-axis rough pocket + finish; deburr and mask threads before anodize. DFM: radii on pocket corners to avoid chatter.

Lead time: Standard reference ≈ 5 days production + 5 days international air sketch ≈ 10 days. Express when stock is ready and finish is light.

Upload STEP on the quote page; flag mass targets and thin walls in notes — see the drone industry page for gimbal / motor-mount siblings.