epe eken 6061
AKA: Al6061-T6 / EN-AW6061
imin baida imin
WorkhorseWeldableCost-effective
Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb.
Zoryra Precision
CNC Materials & Surface Finish Atlas
Select grades and finishes in the quote form — engineering review for special alloys. Match finish to material (e.g. anodize for aluminum).
riring makur imin mungane
kido aeka mungane bita iduwen am makur
Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb.
Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb.
imin eat iminShowing 25 grades
epe eken6
Aluminum 6082
AKA: Al6082 / EN-AW6082
imin baida imin
Medium strengthThermal conductivityWeldable
Medium strength with good weldability/thermal conductivity for structures.
Aluminum 5052
AKA: Al5052 / sheet-metal favorite
imin baida imin
Corrosion resistantBend-friendlyHousings
Corrosion-resistant; common for sheet bend housings and light CNC.
Aluminum 5083
AKA: Al5083 / marine-grade corrosion resistance
imin baida imin
High corrosion resistanceModerate strengthPlate stock
Moderate strength, high corrosion resistance for plates/structures.
epe eken 7075
AKA: Al7075-T6 / EN-AW7075
imin baida imin
High strengthFatigue resistantMachines well
Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb.
Aluminum 2024
AKA: Al2024 / aerospace-class strength
imin baida imin
High strengthFatigue performanceLimited weldability
High-strength aerospace-class Al; welding limited — confirm temper on drawing.
epe dereder4
epe dereder 304
AKA: SS304 / 1.4301
imin baida imin
General stainlessPassivate OKNo anodize
memak-bwe epe dereder; dereder eokong/dereder — eo dereder epe.
epe dereder 316
AKA: SS316 / better corrosion resistance
imin baida imin
Better corrosion resistanceMedical/lab commonPassivate OK
Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb.
Stainless 303
AKA: SS303 / free-machining
imin baida imin
Free-machiningVolume small partsTurn/mill friendly
Free-machining stainless for turned/milled volume small parts.
17-4PH stainless
AKA: 17-4PH / 1.4542
imin baida imin
Precipitation hardeningHigh strengthCall out temper
Precipitation-hardening stainless; call out heat-treat condition on drawings.
epe eokong4
Mild steel
AKA: A36 / Q235 class
imin baida imin
EconomicalPowder / black oxideEasy to machine
Economical structural steel; powder / black oxide / zinc common.
1045 ekaw tañañ epe eokong
AKA: 1045 / C45
imin baida imin
Medium carbonShaftsHeat-treatable
Medium-carbon steel; stronger than mild steel — common for shafts.
4140 epe me epe eokong
AKA: 4140 / 42CrMo class
imin baida imin
High strengthTough / impactConfirm heat treat
Alloy structural steel; confirm heat treatment with engineering.
debitsi epe eokong (memak)
AKA: general tool-steel class
imin baida imin
Wear resistantTooling classSpecify grade in notes
Wear/tooling class — specify exact grade in notes (SKD / S136 etc. via engineer).
epe memak eokong1
epe memak eokong-6epe eken-4V epe memak eokong
AKA: TC4 / Grade 5
imin baida imin
High strength-to-weightLightweightSlower machining
High strength-to-weight; slower machining — engineer review for complex parts.
epe mirara epe me mungane3
epe bababo
AKA: Brass / free-cutting copper alloy
imin baida imin
Free-cuttingConductiveFittings / cosmetics
Free-cutting; good conductivity — fittings and cosmetic parts.
epe mirara eokong
AKA: Bronze
imin baida imin
Wear resistantBushingsNote exact grade
Common for wear bushings — note exact grade when required.
epe mirara C110
AKA: C110 / ETP copper
imin baida imin
High conductivityThermalElectrical / heat sinks
High conductivity for thermal/electrical parts.
makur kererieiy imin eken7
ABS
AKA: ABS engineering plastic
imin baida imin
General housingsEasy machiningFixtures
General housings/fixtures; easy to machine.
Nylon (imin eokong)
AKA: PA / Nylon
imin baida imin
ToughGears / slidersMoisture swell
Tough for gears/sliders — watch moisture swell on fits.
POM / Acetal
AKA: POM / Delrin-class
imin baida imin
Dimensionally stableWear resistantPrecision plastics
Dimensionally stable and wear-resistant for precision plastic parts.
imin burbur eokong (imin aiquen)
AKA: PC
imin baida imin
Clear optionsImpact toughnessStress-crack care
Clear/translucent housings possible — watch stress cracking.
imin burbur / PMMA
AKA: PMMA / acrylic
imin baida imin
Optical / displayPolishableWatch brittleness
Optical/display parts; edges can be polished.
PTFE / Teflon
AKA: PTFE
imin baida imin
Chemically inertLow frictionLow stiffness
Chemically inert, low friction — low stiffness needs design care.
PEEK
AKA: PEEK high-performance plastic
imin baida imin
High tempHigh strengthPremium cost
High-temp/high-strength plastic; premium — for demanding duty.
dereder imin
makur · imin mungane · ibum imur-edae imin
Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb. Amandamw AI ekea tsibog eb. Ganok aton eb muamua.
- imin munganeepe eken / epe eokong / epe dereder / imin eken
- ibum imur iminimin +0 ibum (imin imin)
- dorerdebitsi imin imin; imin bwe imin & anakeba mata mungane.
- imin munganeimin epe eken / epe dereder
- ibum imur imin~+1–2 ibum (imin imin)
- dorerimin imin; imin ian obun dereder epe.
- imin munganeepe eken imin
- ibum imur imin~+2–4 ibum; kabanea imin
- dorerekekur atsin imin ean imin; eo bwe epe dereder.
- imin munganeSS304 / SS316
- ibum imur imin~+1–3 ibum
- dorerimin ebaka epe eo gona; imin epoa dereder.
- imin munganeepe eokong / epe eken ewak eokong
- ibum imur imin~+3–5 ibum
- dorerimin dereder eken; imin anakeba mungane & imin.
- imin munganeepe dereder / epe eken
- ibum imur imin~+1–3 ibum (imin aeka ita)
- dorerjow imin aiquen me eo Ra imin bwe imin.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| imin | Eb dron: mota, bai, liso, batri. 6061 aluminiom. 8–10 aran. Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb. |
| imin eken | POM, Nylon, imin aiquen, PTFE (imin imin) |
| dereder mungane | mwakuri, dereder epe, imin eken, dereder eokong, erauro |
| imin | imin makur imin tsimine bwe aiquen kido pumwen imin |
| DFM imin | Ebogen ñanga amandamw CNC. Oadik ekawē, 6061 aluminiom me ekawē ekea tsibog, likit tolerans ied ata, me anubum. Aran 8–10, aton eb. |
FAQ
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.