Aluminum 6061
AKA: Al6061-T6 / EN-AW6061
Key traits
WorkhorseWeldableCost-effective
Workhorse structural Al (Mg-Si); common default grade in quotes.
Zoryra Precision
CNC ວັດສະດຸ & ສໍາເລັດຮູບໃນ Dongguan, ຈີນ | Zoryra ຄວາມຊັດເຈນ
Zoryra Precision material and finishes in Dongguan, China: 6061/7075, 304/316, POM; anodize, blast, passivate, ຝຸ່ນທາງເລືອກ. ມື້ສຸດທ້າຍນັ່ງຢູ່ໃນໂມງນໍາພາ. ບໍ່ມີການປະດິດ ISO.
Manufacturing materials
Pick grades that fit your project
These grades are selectable in Zoryra Precision AI Instant Quote. Filter by family + process. Missing a grade (e.g. specialty tool steel)? Email [email protected] or talk to an engineer.
Finishes (anodize / blast / passivate / powder) are in the atlas below — match finish to material (no anodize on stainless).
Filter by familyShowing 25 grades
Aluminum6
Aluminum 6082
AKA: Al6082 / EN-AW6082
Key traits
Medium strengthThermal conductivityWeldable
Medium strength with good weldability/thermal conductivity for structures.
Aluminum 5052
AKA: Al5052 / sheet-metal favorite
Key traits
Corrosion resistantBend-friendlyHousings
Corrosion-resistant; common for sheet bend housings and light CNC.
Aluminum 5083
AKA: Al5083 / marine-grade corrosion resistance
Key traits
High corrosion resistanceModerate strengthPlate stock
Moderate strength, high corrosion resistance for plates/structures.
Aluminum 7075
AKA: Al7075-T6 / EN-AW7075
Key traits
High strengthFatigue resistantMachines well
High-strength Al for structural / fatigue parts; machines well; often anodized.
Aluminum 2024
AKA: Al2024 / aerospace-class strength
Key traits
High strengthFatigue performanceLimited weldability
High-strength aerospace-class Al; welding limited — confirm temper on drawing.
Stainless4
Stainless 304
AKA: SS304 / 1.4301
Key traits
General stainlessPassivate OKNo anodize
General-purpose stainless; passivate/polish — not anodize.
Stainless 316
AKA: SS316 / better corrosion resistance
Key traits
Better corrosion resistanceMedical/lab commonPassivate OK
Better corrosion resistance than 304; common in medical/lab hardware.
Stainless 303
AKA: SS303 / free-machining
Key traits
Free-machiningVolume small partsTurn/mill friendly
Free-machining stainless for turned/milled volume small parts.
17-4PH stainless
AKA: 17-4PH / 1.4542
Key traits
Precipitation hardeningHigh strengthCall out temper
Precipitation-hardening stainless; call out heat-treat condition on drawings.
Steel4
Mild steel
AKA: A36 / Q235 class
Key traits
EconomicalPowder / black oxideEasy to machine
Economical structural steel; powder / black oxide / zinc common.
1045 carbon steel
AKA: 1045 / C45
Key traits
Medium carbonShaftsHeat-treatable
Medium-carbon steel; stronger than mild steel — common for shafts.
4140 alloy steel
AKA: 4140 / 42CrMo class
Key traits
High strengthTough / impactConfirm heat treat
Alloy structural steel; confirm heat treatment with engineering.
Tool steel (general)
AKA: general tool-steel class
Key traits
Wear resistantTooling classSpecify grade in notes
Wear/tooling class — specify exact grade in notes (SKD / S136 etc. via engineer).
Titanium1
Ti-6Al-4V titanium
AKA: TC4 / Grade 5
Key traits
High strength-to-weightLightweightSlower machining
High strength-to-weight; slower machining — engineer review for complex parts.
Copper alloys3
Brass
AKA: Brass / free-cutting copper alloy
Key traits
Free-cuttingConductiveFittings / cosmetics
Free-cutting; good conductivity — fittings and cosmetic parts.
Bronze
AKA: Bronze
Key traits
Wear resistantBushingsNote exact grade
Common for wear bushings — note exact grade when required.
Copper C110
AKA: C110 / ETP copper
Key traits
High conductivityThermalElectrical / heat sinks
High conductivity for thermal/electrical parts.
Engineering plastics7
ABS
AKA: ABS engineering plastic
Key traits
General housingsEasy machiningFixtures
General housings/fixtures; easy to machine.
Nylon (PA)
AKA: PA / Nylon
Key traits
ToughGears / slidersMoisture swell
Tough for gears/sliders — watch moisture swell on fits.
POM / Acetal
AKA: POM / Delrin-class
Key traits
Dimensionally stableWear resistantPrecision plastics
Dimensionally stable and wear-resistant for precision plastic parts.
Polycarbonate (PC)
AKA: PC
Key traits
Clear optionsImpact toughnessStress-crack care
Clear/translucent housings possible — watch stress cracking.
Acrylic / PMMA
AKA: PMMA / acrylic
Key traits
Optical / displayPolishableWatch brittleness
Optical/display parts; edges can be polished.
PTFE / Teflon
AKA: PTFE
Key traits
Chemically inertLow frictionLow stiffness
Chemically inert, low friction — low stiffness needs design care.
PEEK
AKA: PEEK high-performance plastic
Key traits
High tempHigh strengthPremium cost
High-temp/high-strength plastic; premium — for demanding duty.
ສໍາເລັດຮູບ atlas
ຂະບວນການ · ວັດສະດຸ · ຜົນກະທົບໃນເວລານຳ
ຜູ້ຊື້ເລືອກສໍາເລັດຮູບ. ມື້ແມ່ນຕົວເພີ່ມອ້າງອີງ — ວົງຢືມແຍກພວກມັນ. ໂປໂລຍ, ແປງ, ໂຄມ, ແຜ່ນສັງກະສີ, ສີດໍາ oxide, electropolish, ແຜ່ນ nickel, tumble, ແລະສີແຕ່ລະຄົນມີຫນ້າແລະສາມາດເລືອກໃນວົງຢືມ.
- ວັດສະດຸAl / ເຫລັກ / ສະແຕນເລດ / ພາດສະຕິກ
- ຜົນກະທົບຕໍ່ການນໍາພາປົກກະຕິ +0 ມື້ (ເຄື່ອງສຳອາງໄວທີ່ສຸດ)
- ໝາຍເຫດເຄື່ອງໝາຍສາມາດເຫັນໄດ້; ທີ່ດີສໍາລັບພາຍໃນແລະການຫາຄູ່ໃບຫນ້າ.
- ວັດສະດຸສ່ວນຫຼາຍແມ່ນ Al / ສະແຕນເລດ
- ຜົນກະທົບຕໍ່ການນໍາພາ~+1-2 ມື້ (ຂຶ້ນກັບຄິວ)
- ໝາຍເຫດແມ້ແຕ່ matte; ທົ່ວໄປກ່ອນທີ່ຈະ anodize.
- ວັດສະດຸພຽງແຕ່ອາລູມິນຽມ
- ຜົນກະທົບຕໍ່ການນໍາພາ~+2–4 ມື້; anodize ແຂງຕໍ່ໄປອີກແລ້ວ
- ໝາຍເຫດອອກໜ້າກາກໃສ່ເຄື່ອງສຳອາງ; ບໍ່ແມ່ນສໍາລັບສະແຕນເລດ.
- ວັດສະດຸSS304 / SS316
- ຜົນກະທົບຕໍ່ການນໍາພາ~+1–3 ມື້
- ໝາຍເຫດປັບປຸງການຕໍ່ຕ້ານ corrosion; ມັກຂັດ.
- ວັດສະດຸໂຄງສ້າງເຫຼັກ/Al
- ຜົນກະທົບຕໍ່ການນໍາພາ~+3-5ມື້
- ໝາຍເຫດຮູບເງົາຫນາ; ກະທູ້ຫນ້າກາກ & ເຫມາະ.
- ວັດສະດຸສະແຕນເລດ / ອາລູມີນຽມ
- ຜົນກະທົບຕໍ່ການນໍາພາ~+1-3 ມື້ (ຊັ້ນເຄື່ອງສຳອາງ)
- ໝາຍເຫດສົ່ງຕົວຢ່າງຫຼືເປົ້າຫມາຍ Ra ສໍາລັບເຄື່ອງສໍາອາງ.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| ໂລຫະ | 6061/7075 Al, 304/316 SS, ເຫລັກ, ທອງເຫລືອງ |
| ພາດສະຕິກ | POM, Nylon, PC, PTFE (ມີໃຫ້ແຕກຕ່າງກັນ) |
| ສຳເລັດ | ເປັນເຄື່ອງຈັກ, anodize, ລະເບີດລູກປັດ, passivate, ເຄືອບຝຸ່ນ |
| ໃບຢັ້ງຢືນ | ມີໃບຢັ້ງຢືນວັດສະດຸຕາມຂໍ້ຕົກລົງການສັ່ງຊື້ |
| ເຄັດລັບ DFM | ຈັບຄູ່ໃຫ້ສຳເລັດເພື່ອເຮັດວຽກ - ເຄື່ອງສຳອາງ anodize ຕ້ອງການບັນທຶກການໃສ່ໜ້າກາກ |
ໃຜຈັກເຄື່ອງ, ແລະຢູ່ໃສ
ຊິ້ນສ່ວນແມ່ນມາຈາກໂຮງງານຜະລິດໂດຍກົງຈາກ Dongguan Zerui Precision Manufacturing Co., Ltd. ໃນ Dongguan, ຈີນ, Guangdong. ຍີ່ຫໍ້ພາຍນອກ: ZORYRA / Zoryra Precision.
ຈາກ 1 ໜ່ວຍ. ຫຼັງຈາກອັບໂຫລດ CAD ທ່ານໄດ້ຮັບເອກະສານອ້າງອີງ AI itemized; ຄໍາສັ່ງຂອງບໍລິສັດປະຕິບັດຕາມຮູບແຕ້ມແລະຂໍ້ສັນຍາການຈ່າຍເງິນທີ່ຕົກລົງ. ພວກເຮົາບໍ່ຜ່ານຮູບພາບພືດພາກສ່ວນທີສາມເປັນສາຍຂອງພວກເຮົາ.
ໜ້ານີ້ສະແດງວ່າບໍ່ມີຕົວເລກ ISO / AS / FDA ທີ່ຖືກປະດິດ. ລະບົບທີ່ພວກເຮົາບໍ່ຖືບໍ່ໄດ້ຂຽນເປັນຖື. ການໄປຢ້ຽມຢາມໂຮງງານສາມາດຈັດລຽງ.
Zoryra Precision material and finishes in Dongguan, China: 6061/7075, 304/316, POM; anodize, blast, passivate, ຝຸ່ນທາງເລືອກ. ມື້ສຸດທ້າຍນັ່ງຢູ່ໃນໂມງນໍາພາ. ບໍ່ມີການປະດິດ ISO.
Dongguan, ຈີນວັດສະດຸແລະສໍາເລັດຮູບ: 6061/7075, 304/316, POM quote-ready. Anodize, blast, passivate, ຜົງເປັນ ticked - ມື້ຢູ່ໃນໂມງນໍາພາ. ສະແຕນເລດບໍ່ແມ່ນ anodized. ໃບຢັ້ງຢືນວັດສະດຸຕໍ່ຄໍາສັ່ງ.
ຊິ້ນສ່ວນທົ່ວໄປ
- ອາລູມີນຽມ Anodized
- ຊິ້ນສ່ວນທີ່ເຮັດດ້ວຍລູກປັດ
- ສະແຕນເລດ Passivated
- ວົງເລັບເຄືອບຜົງ
- ໃບໜ້າເປັນເຄື່ອງຈັກ
- ໂຄງສ້າງເປືອກແຂງ
ວັດສະດຸ & ສໍາເລັດຮູບ
- 6061 — anodize ຕົກລົງ
- 7075 — ເປືອກແຂງ OK
- 304 — passivate, ບໍ່ anodize
- POM — ເປັນເຄື່ອງຈັກ
DFM: ການໃສ່ໜ້າກາກ, ຄວາມໜາຂອງເປືອກຫຸ້ມນອກ, ໜ້າຄູ່
- ຈົບການແຂ່ງຂັນເພື່ອເຮັດວຽກ; ເຄື່ອງສໍາອາງ anodize ຕ້ອງການບັນທຶກຫນ້າກາກ
- ໝາຍກະທູ້ ແລະ ພື້ນຖານ
- ຫ້າມເຮັດສະແຕນເລດ
- ມື້ສຳເລັດນັ່ງຢູ່ເທິງໂມງນຳ
ການກວດກາ ແລະ ເອກະສານ (ຕາມໝາຍຕິກ)
- ລາຍງານຂະໜາດຕາມໝາຍຕິກ
- FAI ຕາມທີ່ໝາຍຕິກ
- CMM ຕາມທີ່ໝາຍໄວ້
- ໃບຢັ້ງຢືນວັດສະດຸຕໍ່ຂໍ້ຕົກລົງການສັ່ງຊື້
ເວລານຳ (ໂມງເລີ່ມຈາກຈຸດຈ່າຍເງິນ)
ຊັ້ນນຳ: ເສດຖະກິດ / ມາດຕະຖານ / ດ່ວນ. ມາດຕະຖານແມ່ນປະມານ 10 ມື້ເຮັດວຽກເປັນເອກະສານອ້າງອີງ; ສະແດງອອກປະມານ 6 ເມື່ອຄວາມອາດສາມາດອະນຸຍາດໃຫ້.
ໂມງເລີ່ມຈາກຈຸດຈ່າຍເງິນທີ່ຕົກລົງ. Anodize, ຝຸ່ນ, passivate, ແລະມື້ການປິ່ນປົວຄວາມຮ້ອນພາຍນອກນັ່ງຢູ່ໃນໂມງນັ້ນ.
Titanium, ເປືອກແຂງໜາ, ແຜ່ນສຽບ, ແລະເຄື່ອງວັດທີ່ຊັບຊ້ອນ ໝູນໂມງຄືນໃໝ່. ແຜນຜັງ quote ປົກຄອງ.
ສິ່ງທີ່ເຮົາບໍ່ເຮັດ
- ສະແຕນເລດບໍ່ຖືກ anodized
- ບໍ່ມີການປະດິດ ISO
- ສິ້ນສຸດມື້ໃນໂມງນໍາພາ
- ການຈັບຄູ່ພິເສດ/Pantone ຕ້ອງການຂໍ້ຕົກລົງດ້ານວິສະວະກຳ
FAQ
ທ່ານມີລາຍຊື່ ISO / AS / FDA ຢູ່ທີ່ນີ້ບໍ?
ບໍ່ມີຕົວເລກປະດິດ. ລະບົບທີ່ພວກເຮົາບໍ່ຖືບໍ່ໄດ້ຂຽນເປັນຖື. ການໄປຢ້ຽມຢາມໂຮງງານສາມາດຈັດລຽງ.
ເຈົ້າເອົາ 1 ໜ່ວຍບໍ?
ແມ່ນແລ້ວ. ຫຼັງຈາກ CAD ທ່ານໄດ້ຮັບເອກະສານອ້າງອີງ AI itemized; ຄໍາສັ່ງຂອງບໍລິສັດປະຕິບັດຕາມຮູບແຕ້ມແລະຂໍ້ຈ່າຍ.
ໂມງນຳເລີ່ມເມື່ອໃດ?
ຢູ່ຈຸດການຈ່າຍເງິນທີ່ຕົກລົງ. Anodize, ຝຸ່ນ, ມື້ passivate ນັ່ງຢູ່ໃນໂມງ. Tiers on the quote: ເສດຖະກິດ / ມາດຕະຖານ / Express.
ສະແຕນເລດສາມາດ anodized ໄດ້?
ບໍ່. Passivate ຫຼື polish ແທນ.
ມື້ສຳເລັດແມ່ນນັບໃສ່ນຳບໍ?
ແມ່ນແລ້ວ. Anodize, ຝຸ່ນ, passivate ນັ່ງຢູ່ໃນໂມງ.
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.