Zoryra Precision
CNC Materials & Surface Finish Atlas
Select grades and finishes in the quote form — engineering review for special alloys. Match finish to material (e.g. anodize for aluminum).
ᐃᓚ ᐊᕕᒃ
ᐃᓚ ᐊᕕᒃ ᐃᓚ ᐃᓚ ᐃᓪᓗᓯ ᐃᓚ
ᐅᓇ ᒪᑭᑦᓯᕕᒃ CNC ᐊᑭᓕᕈᑎᒧᑦ. ᐊᑎᖅᓯᒪᔪᖅ 6061 ᐊᓗᒥᓂᐅᑉ ᐅᕝᕙᓘᓐᓃᑦ ᓴᐃᓐᓕᔅ, ᑎᑎᕋᕐᕕᒃ ᐊᒻᒪ ᐊᒥᓲᓂᖅ. ᐅᓪᓗᐃᑦ 8–10, ᐊᑕᐅᓯᕐᒥᑦ, Dongguan, China-ᒥ.
ᐅᓇ ᒪᑭᑦᓯᕕᒃ CNC ᐊᑭᓕᕈᑎᒧᑦ. ᐊᑎᖅᓯᒪᔪᖅ 6061 ᐊᓗᒥᓂᐅᑉ ᐅᕝᕙᓘᓐᓃᑦ ᓴᐃᓐᓕᔅ, ᑎᑎᕋᕐᕕᒃ ᐊᒻᒪ ᐊᒥᓲᓂᖅ. ᐅᓪᓗᐃᑦ 8–10, ᐊᑕᐅᓯᕐᒥᑦ, Dongguan, China-ᒥ.
ᐃᓚ ᐃᓚ ᐃᓚShowing 25 grades
ᐊᓗᒥᓂ6
Aluminum 6082
AKA: Al6082 / EN-AW6082
ᐃᓚ ᐃᓚ
Medium strengthThermal conductivityWeldable
Medium strength with good weldability/thermal conductivity for structures.
Aluminum 5052
AKA: Al5052 / sheet-metal favorite
ᐃᓚ ᐃᓚ
Corrosion resistantBend-friendlyHousings
Corrosion-resistant; common for sheet bend housings and light CNC.
Aluminum 5083
AKA: Al5083 / marine-grade corrosion resistance
ᐃᓚ ᐃᓚ
High corrosion resistanceModerate strengthPlate stock
Moderate strength, high corrosion resistance for plates/structures.
Aluminum 2024
AKA: Al2024 / aerospace-class strength
ᐃᓚ ᐃᓚ
High strengthFatigue performanceLimited weldability
High-strength aerospace-class Al; welding limited — confirm temper on drawing.
ᓴᐃᓐᓕᔅ4
Stainless 303
AKA: SS303 / free-machining
ᐃᓚ ᐃᓚ
Free-machiningVolume small partsTurn/mill friendly
Free-machining stainless for turned/milled volume small parts.
17-4PH stainless
AKA: 17-4PH / 1.4542
ᐃᓚ ᐃᓚ
Precipitation hardeningHigh strengthCall out temper
Precipitation-hardening stainless; call out heat-treat condition on drawings.
ᓴᐅᔭ4
Mild steel
AKA: A36 / Q235 class
ᐃᓚ ᐃᓚ
EconomicalPowder / black oxideEasy to machine
Economical structural steel; powder / black oxide / zinc common.
1045 ᐃᓚ ᓴᐅᔭ
AKA: 1045 / C45
ᐃᓚ ᐃᓚ
Medium carbonShaftsHeat-treatable
Medium-carbon steel; stronger than mild steel — common for shafts.
4140 ᓴᕕᕋᔭᖅ ᓴᐅᔭ
AKA: 4140 / 42CrMo class
ᐃᓚ ᐃᓚ
High strengthTough / impactConfirm heat treat
Alloy structural steel; confirm heat treatment with engineering.
ᐃᓚ ᓴᐅᔭ (ᐃᓚ)
AKA: general tool-steel class
ᐃᓚ ᐃᓚ
Wear resistantTooling classSpecify grade in notes
Wear/tooling class — specify exact grade in notes (SKD / S136 etc. via engineer).
ᓴᐅᔭ1
ᐃᓚ-6ᐃᓚ-4V ᓴᐅᔭ
AKA: TC4 / Grade 5
ᐃᓚ ᐃᓚ
High strength-to-weightLightweightSlower machining
High strength-to-weight; slower machining — engineer review for complex parts.
ᐱᓕᕆ ᐃᓚ7
Nylon (ᐃᓚ)
AKA: PA / Nylon
ᐃᓚ ᐃᓚ
ToughGears / slidersMoisture swell
Tough for gears/sliders — watch moisture swell on fits.
POM / Acetal
AKA: POM / Delrin-class
ᐃᓚ ᐃᓚ
Dimensionally stableWear resistantPrecision plastics
Dimensionally stable and wear-resistant for precision plastic parts.
PTFE / Teflon
AKA: PTFE
ᐃᓚ ᐃᓚ
Chemically inertLow frictionLow stiffness
Chemically inert, low friction — low stiffness needs design care.
ᐊᐃᕕᖅ ᐃᓚ
ᐱᔨᕐ · ᐊᕕᒃ · ᐅᓪᓗᖅ-ᐱᕕ ᐃᓚ
ᐅᓇ ᒪᑭᑦᓯᕕᒃ CNC ᐊᑭᓕᕈᑎᒧᑦ. ᐊᑎᖅᓯᒪᔪᖅ 6061 ᐊᓗᒥᓂᐅᑉ ᐅᕝᕙᓘᓐᓃᑦ ᓴᐃᓐᓕᔅ, ᑎᑎᕋᕐᕕᒃ ᐊᒻᒪ ᐊᒥᓲᓂᖅ. ᐅᓪᓗᐃᑦ 8–10, ᐊᑕᐅᓯᕐᒥᑦ, Dongguan, China-ᒥ. AI ᐊᑭᓕᕈᑎ ᐊᔪᕆᖅᓱᖅᑐᖅ. ᐊᑕᐅᓯᖅ ᓂᐅᕕᕆᐊᕈᕕᒃ ᐊᒥᓲᓕᕆᓐᓂᐊᕋᕕᑦ.
- ᐊᕕᒃᐃᓚ / ᓴᐅᔭ / ᓴᐃᓐᓕᔅ / ᐃᓚ
- ᐅᓪᓗᖅ ᐃᓚᐃᓚ +0 ᐅᓪᓗᖅ (ᐃᓚ ᐃᓚ)
- ᑐᓴᖅᐃᓚ ᐃᓚ ᐃᓚ; ᐃᓚ ᒧᑦ ᐃᓚ & ᐃᓚ ᐃᓚ.
- ᐊᕕᒃᐃᓚ ᐃᓚ / ᓴᐃᓐᓕᔅ
- ᐅᓪᓗᖅ ᐃᓚ~+1–2 ᐅᓪᓗᖅ (ᐃᓚ ᐃᓚ)
- ᑐᓴᖅᐃᓚ ᐃᓚ; ᐃᓚ ᐃᓚ ᐊᐃᕕᖅ.
- ᐊᕕᒃᐊᓗᒥᓂ ᐃᓚ
- ᐅᓪᓗᖅ ᐃᓚ~+2–4 ᐅᓪᓗᖅ; ᐊᐃᕕᖅ ᐃᓚ
- ᑐᓴᖅᐃᓚ ᐃᓚ ᐃᓚ ᒥ ᐃᓚ; ᑕᐃᒪᙵᑦ ᒧᑦ ᓴᐃᓐᓕᔅ.
- ᐊᕕᒃSS304 / SS316
- ᐅᓪᓗᖅ ᐃᓚ~+1–3 ᐅᓪᓗᖅ
- ᑐᓴᖅᐃᓚ ᐃᓚ ᐃᓚ; ᐃᓚ ᖃᓄᖅ ᐊᐃᕕᖅ.
- ᐊᕕᒃᓴᐅᔭ / ᐃᓚ ᐃᓚ
- ᐅᓪᓗᖅ ᐃᓚ~+3–5 ᐅᓪᓗᖅ
- ᑐᓴᖅᐃᓚ ᐃᓚ; ᐃᓚ ᐊᐅᓪᓚᕆᔭᖅ & ᐃᓚ.
- ᐊᕕᒃᓴᐃᓐᓕᔅ / ᐊᓗᒥᓂ
- ᐅᓪᓗᖅ ᐃᓚ~+1–3 ᐅᓪᓗᖅ (ᐃᓚ ᐊᕕᒃ)
- ᑐᓴᖅᐊᐅᓪᓚᖅᑎ ᐅᔭᕋ ᐅᕝᕙ Ra ᐃᓚ ᒧᑦ ᐃᓚ.
Metals
Al6061/7075/5052, SS304/316/303, mild steel, 4140, brass, copper. Titanium on request via engineering review.
Plastics
ABS, Nylon, POM, PC, PEEK and similar engineering plastics common in fixtures and housings.
Finishes
As-machined, bead blast, clear/black/hard anodize, powder coat, passivate, polish, brushed, chromate, zinc plate, black oxide. Plating beyond the list is discussed case by case.
Lead-time impact (production clock)
Reference: blast +1–2d, anodize +2–4d, powder +3–5d. Courier days stay separate on the quote. See the problem guide on masking before you freeze PO dates.
Compatibility tips
Anodize is typical for aluminum; passivation for stainless; black oxide / zinc for steels. Cosmetic anodize needs masking notes on drawings — thermal faces on electronics often stay as-machined.
Certificates
Material certificates / heat-lot traceability available per order agreement when selected — no invented cert numbers on marketing pages.
Capability specs & DFM
| Item | Spec |
|---|---|
| ᐃᓚ | ᑕᕐᕋᔭᖅ: ᒥᑐ, ᑕᓕᖅ, ᓴᓂᕐᕋᔭᖅ, ᐸᑦᕆ. 6061 ᐊᓗᒥᓂᐅᑉ. 8–10 ᐅᓪᓗᖅ. ᐅᓇ ᒪᑭᑦᓯᕕᒃ CNC ᐊᑭᓕᕈᑎᒧᑦ. ᐊᑎᖅᓯᒪᔪᖅ 6061 ᐊᓗᒥᓂᐅᑉ ᐅᕝᕙᓘᓐᓃᑦ ᓴᐃᓐᓕᔅ, ᑎᑎᕋᕐᕕᒃ ᐊᒻᒪ ᐊᒥᓲᓂᖅ. ᐅᓪᓗᐃᑦ 8–10, ᐊᑕᐅᓯᕐᒥᑦ, Dongguan, China-ᒥ. |
| ᐃᓚ | POM, Nylon, ᐃᓚ, PTFE (ᐃᓚ ᐃᓚ) |
| ᐊᐃᕕᖅ | ᐱᔨ, ᐊᐃᕕᖅ, ᐃᓚ, ᐊᐃᕕᖅ, ᐃᓚ |
| ᐃᓚ | ᐊᕕᒃ ᐃᓚ ᐃᓚ ᐃᓚ ᑎᓕ ᐃᓚ |
| DFM ᐃᓚ | ᐅᓇ ᒪᑭᑦᓯᕕᒃ CNC ᐊᑭᓕᕈᑎᒧᑦ. ᐊᑎᖅᓯᒪᔪᖅ 6061 ᐊᓗᒥᓂᐅᑉ ᐅᕝᕙᓘᓐᓃᑦ ᓴᐃᓐᓕᔅ, ᑎᑎᕋᕐᕕᒃ ᐊᒻᒪ ᐊᒥᓲᓂᖅ. ᐅᓪᓗᐃᑦ 8–10, ᐊᑕᐅᓯᕐᒥᑦ, Dongguan, China-ᒥ. |
FAQ
Can I anodize stainless?
Anodize is typical for aluminum. For stainless, passivation or polish is the usual path — confirm in RFQ.
Is hard anodize available?
Yes — selectable as Hard anodize in the quote finish list for aluminum parts.
How many days does finishing add?
Reference: blast +1–2d, anodize +2–4d, powder +3–5d — see the finish atlas. Final days are itemized on the quote.
Where do I configure finish for a real part?
On the quote page — pick material + finish there, then engineering confirms masking / thermal keep-outs.
Next: upload CAD or talk to an Engineer
AI Instant Reference Quote + engineering review within 12 business hours.