Pièces types
Caliper bodies and bridges · Caliper mounting brackets · Sensor and harness housings · Pedal and pushrod mounts
Zoryra Precision
Brake and auto parts CNC | Zoryra Precision
We machine the metal around a brake assembly: caliper bodies, brackets, housings, pedal seats, and sensor mounts. Friction-material recipes and a full brake-system approval are outside this shop.
- Bore and face datums
- Optional material cert
- Aluminum or iron per drawing
- Pilot quantities
Brake hardware has to meet a piston bore, a mounting face, and a sensor hole. Upload STEP plus a PDF with tolerances, pick material and inspection, and the quote lists bores, pockets, threads, and faces as features.
We do not name vehicle programs or print a brake-certificate number. If you need a material cert or a first-article report, say so on the RFQ and we confirm it before cutting.
Pourquoi Zoryra · Brake and auto parts CNC | Zoryra Precision
Repères de tolérance (le plan prime)
Piston bores and mounting faces follow the drawing, often ±0.02–0.05 mm. Tighter zones are only where you call them out. Flatness is not assumed.
Points de vigilance
Bore and face datums · Optional material cert · Aluminum or iron per drawing · Pilot quantities
Pièces types
- Caliper bodies and bridges
- Caliper mounting brackets
- Sensor and harness housings
- Pedal and pushrod mounts
- Brake-line fitting seats
- Fit-check and gauge plates
Repères de tolérance (le plan prime)
Piston bores and mounting faces follow the drawing, often ±0.02–0.05 mm. Tighter zones are only where you call them out. Flatness is not assumed.
Points de vigilance
- We machine the metal parts, not the friction compound
- Mark seal faces, piston bores, and sensor holes
- Anodize, passivate, or paint changes the lead time
Liés
FAQ
Do you certify or supply a complete brake system?
No. This page is for machined calipers, brackets, housings, pedal mounts, and sensor mounts. System approval and friction material are not part of it.
Téléverser le CAO pour une référence détaillée
Devis de référence instantané + revue ingénierie sous 12 h ouvrées.
Autres secteurs
Robotics & automationSupports, effecteurs, montages capteurs et plaques de fixture avec revue DFM pour interfaces critiques d'ajustement.MedicalBoîtiers, supports et interfaces de précision pour instruments — pas implants / ITAR.AutomotiveCNC prototype-à-pilote pour fixtures, supports refroidissement et hardware sur mesure — direct usine Dongguan, Chine.UAV / dronesFraisage alu sensible au poids avec stratégies de poches et options finition pour hardware de vol.Electronics & semiconductorPlaques CNC, supports compatibles EMI et couvercles tôlerie avec boucles prototype rapides.AI hardwareUsine à Dongguan, Chine pour Hardware IA / plaques froides. Téléversez STEP / STL / IGES pour une référence détaillée — dès 1 pièce.