Typiske emner
Edge-box housings and covers · Vision and camera mounts · Sensor and lidar plates · Board standoff brackets
Zoryra Precision
AI Application Hardware CNC | Zoryra Precision
Enclosures and mounts for products that run a model at the edge: vision modules, sensor plates, and small compute boxes. GPU cold plates are a different page.
- Fit to a board and a lens
- Small pilot lots
- Anodize or powder notes
- DFM on thin walls
AI application hardware is usually a box, a camera mount, and a few brackets that have to match a board and a lens. We machine those metal and engineering-plastic parts, then you assemble the electronics.
If the job is a liquid cold plate or a GPU bracket, use the AI hardware industry page so the quote follows that feature set. We do not publish model scores, customer logos, or made-up shipment counts.
Hvorfor Zoryra · AI Application Hardware CNC | Zoryra Precision
Tolerancevejledning (tegningen gælder)
Lens and board datums often ±0.05 mm; tighter bores only where the drawing says so. Cosmetic faces need the finish called out up front.
Vær opmærksom på
Fit to a board and a lens · Small pilot lots · Anodize or powder notes · DFM on thin walls
Typiske emner
- Edge-box housings and covers
- Vision and camera mounts
- Sensor and lidar plates
- Board standoff brackets
- Kiosk and terminal frames
- Cable and connector panels
Tolerancevejledning (tegningen gælder)
Lens and board datums often ±0.05 mm; tighter bores only where the drawing says so. Cosmetic faces need the finish called out up front.
Vær opmærksom på
- Cold plates and GPU brackets belong on the AI hardware page
- Mark cosmetic faces and anodize masking
- We do not claim an AI model or a benchmark
Relateret
FAQ
Is this the same as the AI hardware page?
No. AI hardware covers cold plates, GPU brackets, and optics housings for the compute stack. This page covers the product around an application: edge boxes, vision mounts, and sensor plates.
Upload CAD til specificeret reference
Direkte referencetilbud + ingeniørgennemgang inden for 12 arbejdstimer.
Andre brancher
Robotik og automatiseringFabriken i Dongguan, China til Robotik og automation. Upload STEP / STL / IGES — fra 1 stk.MedicinskFabriken i Dongguan, China til Medicinsk og laboratorieudstyr. Upload STEP / STL / IGES — fra 1 stk.AutomotiveFabriken i Dongguan, China til Automotive og EV. Upload STEP / STL / IGES — fra 1 stk.UAV / dronesFabriken i Dongguan, China til Drone- / UAV-strukturer. Upload STEP / STL / IGES — fra 1 stk.Elektronik og halvlederFabriken i Dongguan, China til Elektronikhardware. Upload STEP / STL / IGES — fra 1 stk.AI hardwareFabriken i Dongguan, China til AI-hardware. Upload STEP / STL / IGES — fra 1 stk.