Case: UAV Brushless Motor Mount — Al6061, Black Anodize, 20 pcs

Part type: quadcopter brushless motor mount plate with standoffs and M3 motor bolt pattern.

Material: Al6061-T6. Finish: black anodize on exterior; as-machined on motor seating face. Qty: 20 pcs pilot.

Tolerances: motor bolt circle ±0.05 mm; standoff height ±0.02 mm to seating face; wall ≥1.5 mm after pocketing.

Process: 3-axis pocket between standoffs; deburr; mask threads and motor face before anodize.

Lead time: Standard ≈ 5d production + 5d air sketch ≈ 10d with black anodize (+2d on production clock).

Pair with arm connector case on the drone industry page — upload STEP and note 6061 vs 7075 if strength is tight.