Case: UAV Battery Tray Slide Rail — Thin-Wall Pocketing, 15 pcs

Part type: LiPo battery tray slide rail pair with latch cutouts and lightening pockets.

Material: Al6061-T6. Finish: clear anodize. Qty: 15 sets (30 rails).

Tolerances: slide width +0.05/−0 mm to mate ABS tray; latch slot position ±0.1 mm.

Process: rough pocket then finish rails; radii ≥2 mm on pocket corners per thin-wall DFM; no anodize inside slide track.

Lead time: Standard ≈ 10 days reference for 15 sets — reorder rhythm shared for blank planning.

Upload STEP with tray mate model if available; see solve-drone-thinwall-weight for pocket rules.